AZM300B-I1-ST-1P2P-A Schmersal Safety Switches

Product Details

• Test pulse interval, typical
  1000 ms
• Voltage, Utilisation category DC13
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Voltage, Utilisation category DC12
  24 VDC
• Current leakage Ir
  0.5 mA
• Current, Utilisation category DC13
  0.05 A
• Current, Utilisation category DC12
  0.05 A
• Versions
  short-circuit proof, p-type
• Duty cycle solenoid
  100 %
• Classification ZVEI CB24I, Sink
  C1, C2
• Classification ZVEI CB24I, Source
  C2
• Test pulse interval, minimum
  100 ms
• External wiring and device fuse rating
  2 A gG
• Test pulse duration, maximum
  0.5 ms
• Current consumption at 24V
  5 mA
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, maximum
  0.5 Hz
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Required rated short-circuit current to EN 60947-5-1
  200 A
• Current consumption with solenoid ON, average
  200 mA
Notes (Power supply, general)
stabilised PELV power supply
No-load supply current I0
100 mA
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Degree of pollution to IEC/EN 60664-1
3
Rated impulse withstand voltage Uimp
0.8 kV
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Storage and transport temperature, minimum
-10 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Ambient temperature, minimum
+0 °C
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
93 %
Ambient temperature, maximum
+60 °C
Storage and transport temperature, maximum
+90 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Height of sensor
35 mm
Width of sensor
87.5 mm
Terminal Connector
Connector M12, 8-pole, A-coded
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor chain, maximum
200 m
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor
120 mm
Ensured switch distance OFF Sar
20 mm
Ensured switch distance ON Sao
1 mm
Tightening torque for the fixing screws, maximum
7 Nm
Switch distance
2 mm
Type of the fixing screws
2x M6
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 2
50 N
Clamping force, maximum Fmax
1,500 N
Latching force, adjustable, position 1
25 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Angular offset between interlocking device and actuator, maximum
2 °
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Safety functions
Yes
Number of fail-safe digital outputs
2
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Manual release
Yes
Series-wiring
Yes
Latching
Yes
Actuator monitored
Yes
Power to lock
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Gross weight
550 g
Time to readiness, maximum
5,000 ms
Transmit power, maximum
-6 dB/m
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Active principle
RFID
Duration of risk, maximum
200 ms
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Frequency band RFID
125 kHz
Coding level according to ISO 14119
High
general information
Individual coding

Related documents AZM300B-I1-ST-1P2P-A Specs