161524 Euchner Safety Proximity Sensors

161524 on MQ Automation
Euchner
  • 161524
  • 161524
  • 161524

Part#:161524

Alt. Part#:CET3-AP-CRA-AH-50X-SF-161524

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

161524 Euchner - Non-contact safety switch CET-AP-..., M12

Product Details

  • Weight
    2.80207202 lb
  • Series
    CET-AP
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    3.1 x 10⁻⁹
  • Performance Level
    PL e
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Repeat accuracy R
    10 %
  • Turn-on time
    400 ms
  • Switching delay from state change
    max.400 ms
  • Discrepancy time
    max.10 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Switching current
    1 ... 200 mA
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    UB-1,5V ... UB V DC
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Safety class
    III
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Fusing
    0,25 ... 8 A
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    450 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions of up to 5ms)
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Locking force Fmax
    6500 N
  • Guard locking principle
    Closed-circuit current principle
  • Connection
    1 plug connector M12, 8-pin
  • Approach speed
    max.20 m/min
  • Ready delay
    1 s
  • Switching frequency
    max.0,5 Hz
  • Housing material
    Stainless steel
  • Installation orientation
    Any (Preferably head downward)
  • Degree of freedom Y
    ±5 mm
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom X
    ±5 mm
  • Ambient temperature
    -20 ... 55 °C
  • Mechanical life
    1 x 10⁶
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Weight
    1 kg
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 161524 on MQ Automation is $760.53. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 1 plug connector M12, 8-pin, can be rotated by 360°;Unicode;Door monitoring output;Indication of the door position by LED;Approach direction A (delivery state)


Manufacturer warranty

161524 Euchner

$760.53

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$760.53

$760.53 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 161524 with other products

Weight

Series

Product Class

Mission time

PFHD

Performance Level

Category

For the approval acc. to ...

Repeat accuracy R

Turn-on time

Switching delay from stat...

Discrepancy time

Risk time according to EN...

Type of output

Switching load

Switching current

Off-state current Ir

Output voltage

Connecting cable

Safety class

Solenoid operating voltag...

Degree of contamination (...

Solenoid duty cycle

EMC protection requiremen...

Connection rating

Fusing

Utilization category acc....

Current consumption

Operating voltage DC

Locking force FZh

Locking force Fmax

Guard locking principle

Connection

Approach speed

Ready delay

Switching frequency

Housing material

Installation orientation

Degree of freedom Y

Degree of freedom Z

Degree of freedom X

Ambient temperature

Mechanical life

Degree of protection

Shock and vibration resis...

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extension of risk time ac...

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

161524
0 in stock
161524
Euchner

161524 Euchner - Non-contact safety switch CET-AP-..., M12

Weight2.80207202 lb

SeriesCET-AP

Product ClassSafety System

Mission time20 y

PFHD3.1 x 10⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Turn-on time400 ms

Switching delay from state changemax.400 ms

Discrepancy timemax.10 ms

Risk time according to EN 60947-5-3max.400 ms

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (For altern...

Switching current1 ... 200 mA

Off-state current Irmax.0,25 mA

Output voltageUB-1,5V ... UB V DC

Connecting cable30V DC, 2A (For UL requirem...

Safety classIII

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption450 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh5000 N (FZH = FMAX/1.3)

Locking force Fmax6500 N

Guard locking principleClosed-circuit current princ...

Connection1 plug connector M12, 8-pin

Approach speedmax.20 m/min

Ready delay1 s

Switching frequencymax.0,5 Hz

Housing materialStainless steel

Installation orientationAny (Preferably head downwa...

Degree of freedom Y±5 mm

Degree of freedom Z±4 mm

Degree of freedom X±5 mm

Ambient temperature-20 ... 55 °C

Mechanical life1 x 10⁶

Degree of protectionIP67 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Switching delay from state change-

Discrepancy timemax.10 ms In acc. with EN ...

Risk time according to EN 60947-5-3max.260 ms

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (Alternativ...

Switching current1 ... 50 mA

Off-state current Irmax.0,25 mA

Output voltage0,8xUB ... UB V DC

Connecting cable-

Safety classIII

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Guard locking principleClosed-circuit current princ...

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Ready delay8 s

Switching frequencymax.0,5 Hz

Housing materialDie-cast zinc

Installation orientationAny

Degree of freedom Y-

Degree of freedom Z-

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Switching delay from state change-

Discrepancy timemax.10 ms In acc. with EN ...

Risk time according to EN 60947-5-3-

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Switching current1 ... 150 mA

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Connecting cable-

Safety classIII

Solenoid operating voltage DC-

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh-

Locking force Fmax-

Guard locking principle-

Connection2 plug connectors M12, 5-pin

Approach speedmax.20 m/min

Ready delaymax.1 s

Switching frequencymax.0,5 Hz

Housing materialFiber glass reinforced therm...

Installation orientationDoor hinge DIN right

Degree of freedom Y-

Degree of freedom Z-

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Degree of protectionIP65 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per device-

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 161524?
The price of 161524 on MQ Automation is $760.53. Order now.

Out if stock but available for backorder.

161524 Euchner - Non-contact safety switch CET-AP-..., M12

What can I help you find today?

Recommended parts