128193 Euchner Safety Proximity Sensors
Part#:128193
Alt. Part#:CET4-AR-CRA-AH-50X-SG-C2290-128193
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
128193 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden) (3 m)
Product Details
- Weight 4.00579454 lb
- Series CET-AR
- Product Class Safety System
- Mission time 20 y
- PFHD Depending on external control of guard locking (Teach-in input and LEDs have the same ground potential as the guard locking solenoid)
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions
- Switching delay from state change max.400 ms
- Performance Level Depending on external control of guard locking (Teach-in input and LEDs have the same ground potential as the guard locking solenoid)
- Category Depending on external control of guard locking (Teach-in input and LEDs have the same ground potential as the guard locking solenoid)
- Turn-on time 400 ms
- Repeat accuracy R 10 %
- Off-state current Ir max.0,25 mA
- Discrepancy time max.10 ms
- Output voltage UB-1,5V ... UB V DC
- Type of output 2 semiconductor outputs, p-switching, short circuit-proof
- Risk time according to EN 60947-5-3 max.400 ms
- Switching current 1 ... 200 mA
- Extension of risk time according to EN 60947-5-3 per device max.5 ms
- Input voltage 15 ... 27,6 V DC
- Switching load 24V DC, class 2 (For alternatives see operating instructions)
- Connecting cable 30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
- Degree of contamination (external, according to EN 60947-1) 3
- Safety class III
- Solenoid duty cycle 100 %
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Connection rating 11 W
- Fusing 0,25 ... 8 A
- Utilization category acc. to EN 60947-5-2 24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
- Solenoid operating voltage DC 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Current consumption 80 mA
- Operating voltage DC 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Locking force FZh 5000 N (FZH = FMAX/1.3)
- Locking force Fmax 6500 N
- Guard locking principle Open-circuit current principle
- Approach speed max.20 m/min
- Switching frequency max.0,5 Hz
- Connection 2 plug connectors M12, 5 and 8-pin
- Ready delay 10 s
- Shock and vibration resistance In acc. with EN 60947-5-3
- Degree of freedom Y ±5 mm
- Degree of freedom Z ±4 mm
- Installation orientation Any (Preferably head downward)
- Degree of freedom X ±5 mm
- Housing material Stainless steel
- Weight 1 kg
- Ambient temperature -20 ... 55 °C
- Degree of protection IP67 (Screwed tight plug connector/mating component)
- Mechanical life 1 x 10⁶
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 128193 on MQ Automation is $1,083.36. Order now.
About the product
Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;Door monitoring output;Indication of the door position by LED;Teach-in input;Wire front release (bowden), 3 m;Approach direction A (delivery state)
Manufacturer warranty
128193 Euchner
$1,083.36
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$1,083.36
$1,083.36 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 128193 with other products
Weight
Series
Product Class
Mission time
PFHD
For the approval acc. to ...
Switching delay from stat...
Performance Level
Category
Turn-on time
Repeat accuracy R
Off-state current Ir
Discrepancy time
Output voltage
Type of output
Risk time according to EN...
Switching current
Extension of risk time ac...
Input voltage
Switching load
Connecting cable
Degree of contamination (...
Safety class
Solenoid duty cycle
EMC protection requiremen...
Connection rating
Fusing
Utilization category acc....
Solenoid operating voltag...
Current consumption
Operating voltage DC
Locking force FZh
Locking force Fmax
Guard locking principle
Approach speed
Switching frequency
Connection
Ready delay
Shock and vibration resis...
Degree of freedom Y
Degree of freedom Z
Installation orientation
Degree of freedom X
Housing material
Ambient temperature
Degree of protection
Mechanical life
Additional feature
Rated impulse withstand v...
Rated insulation voltage ...
Test pulses
Test-pulse interval
Actuating force
Extraction force
Overtravel
Retention force
B10D
Version
Operating current
Switching element
Detent mechanism
Operating voltage
Selected product
128193
Euchner
128193 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden) (3 m)
Weight4.00579454 lb
SeriesCET-AR
Product ClassSafety System
Mission time20 y
PFHDDepending on external contro...
For the approval acc. to UL the following appliesOperation only with UL class...
Switching delay from state changemax.400 ms
Performance LevelDepending on external contro...
CategoryDepending on external contro...
Turn-on time400 ms
Repeat accuracy R10 %
Off-state current Irmax.0,25 mA
Discrepancy timemax.10 ms
Output voltageUB-1,5V ... UB V DC
Type of output2 semiconductor outputs, p-s...
Risk time according to EN 60947-5-3max.400 ms
Switching current1 ... 200 mA
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Input voltage15 ... 27,6 V DC
Switching load24V DC, class 2 (For altern...
Connecting cable30V DC, 2A (For UL requirem...
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Solenoid duty cycle100 %
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connection rating11 W
Fusing0,25 ... 8 A
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Current consumption80 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force FZh5000 N (FZH = FMAX/1.3)
Locking force Fmax6500 N
Guard locking principleOpen-circuit current princip...
Approach speedmax.20 m/min
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5 and...
Ready delay10 s
Shock and vibration resistanceIn acc. with EN 60947-5-3
Degree of freedom Y±5 mm
Degree of freedom Z±4 mm
Installation orientationAny (Preferably head downwa...
Degree of freedom X±5 mm
Housing materialStainless steel
Ambient temperature-20 ... 55 °C
Degree of protectionIP67 (Screwed tight plug co...
Mechanical life1 x 10⁶
Additional feature-
Rated impulse withstand voltage Uimp-
Rated insulation voltage Ui-
Test pulses-
Test-pulse interval-
Actuating force-
Extraction force-
Overtravel-
Retention force-
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
PFHD4.1 x 10 ⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Switching delay from state change-
Performance LevelPL e
Category4
Turn-on timemax.400 ms
Repeat accuracy R10 %
Off-state current Irmax.0,25 mA
Discrepancy timemax.10 ms In acc. with EN ...
Output voltage0,8xUB ... UB V DC
Type of outputp-switching, short circuit-p...
Risk time according to EN 60947-5-3max.260 ms
Switching current1 ... 50 mA
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Input voltage-
Switching load24V DC, class 2 (Alternativ...
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Solenoid duty cycle100 %
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connection rating6 W
Fusing0,25 ... 8 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Current consumption40 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Locking force Fmax3900 N
Guard locking principleClosed-circuit current princ...
Approach speedmax.20 m/min
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5 and...
Ready delay8 s
Shock and vibration resistanceIn acc. with EN 60947-5-3
Degree of freedom Y-
Degree of freedom Z-
Installation orientationAny
Degree of freedom X-
Housing materialDie-cast zinc
Ambient temperature-20 ... +55 °C
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Mechanical life1 x 10⁶
Additional featureEscape release actuated by p...
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.1,0 ms (Applies for a l...
Test-pulse intervalmin.140 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force20 N
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
PFHD4.1 x 10 ⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Switching delay from state change-
Performance LevelPL e
Category4
Turn-on timemax.400 ms
Repeat accuracy R10 %
Off-state current Irmax.0,25 mA
Discrepancy timemax.10 ms In acc. with EN ...
Output voltage0 ... 1 V DC
Type of output2 semiconductor outputs, p-s...
Risk time according to EN 60947-5-3-
Switching current1 ... 150 mA
Extension of risk time according to EN 60947-5-3 per device-
Input voltage-
Switching load24V DC, class 2 (Alternativ...
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Solenoid duty cycle-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Connection rating1 W
Fusing0,25 ... 8 A
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Solenoid operating voltage DC-
Current consumption40 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Locking force FZh-
Locking force Fmax-
Guard locking principle-
Approach speedmax.20 m/min
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5-pin
Ready delaymax.1 s
Shock and vibration resistanceIn acc. with EN 60947-5-3
Degree of freedom Y-
Degree of freedom Z-
Installation orientationDoor hinge DIN right
Degree of freedom X-
Housing materialFiber glass reinforced therm...
Ambient temperature-20 ... +55 °C
Degree of protectionIP65 (Screwed tight plug co...
Mechanical life1 x 10⁶
Additional feature-
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.0,3 ms (Applies for a l...
Test-pulse intervalmin.100 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force-
B10D0,13 x 10⁶
VersionEmergency stop
Operating current1 ... 100 mA
Switching element2 pos. driven NC
Detent mechanismSnap-in bolt
Operating voltage5 ... 24 V
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 128193?
The price of 128193 on MQ Automation is $1,083.36. Order now.
Out if stock but available for backorder.
128193 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden) (3 m)
Similar products from: Safety Proximity Sensors
What can I help you find today?
