127640 Euchner Safety Switches

127640 on MQ Automation
Euchner
  • 127640
  • 127640
  • 127640

Part#:127640

Alt. Part#:CTP-L1-AP-U-HA-AE-SII-127640

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Product description

127640 Euchner - Transponder-coded safety switch CTP-AP, 2 x M12, with escape release

Product Details

  • Weight
    1.72842208 lb
  • Series
    CTP-AP
  • Product Class
    Safety System
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Mission time
    20 y
  • PFHD
    4.1 x 10 ⁻⁹
  • Category
    4
  • Repeat accuracy R
    10 %
  • Performance Level
    PL e
  • Turn-on time
    max.400 ms
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Additional feature
    Escape release actuated by pushing
  • Output voltage
    UB-1,5 ... UB V DC
  • Off-state current Ir
    max.0,25 mA
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching current
    1 ... 150 mA
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Safety class
    III
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Solenoid duty cycle
    100 %
  • Connection rating
    6 W
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Fusing
    0,5 ... 8 A
  • Rated insulation voltage Ui
    50 V
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Test pulses
    max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    40 mA
  • Test-pulse interval
    min.100 ms
  • Extraction force
    20 N
  • Overtravel
    5 mm
  • Guard locking principle
    Closed-circuit current principle
  • Actuating force
    10 N
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Retention force
    20 N
  • Approach speed
    max.20 m/min
  • Locking force Fmax
    3900 N
  • Connection
    2 plug connectors M12, 5-pin + pin 5 not used
  • Weight
    0,42 kg
  • Housing material
    Die-cast zinc
  • Ready delay
    max.1 s
  • Ambient temperature
    -20 ... +55 °C
  • Installation orientation
    Any
  • Mechanical life
    1 x 10⁶
  • Switching frequency
    max.0,5 Hz
  • Degree of protection
    IP67/IP69/IP69K (Screwed tight plug connector/mating component)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 127640 on MQ Automation is $922.38. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Direct connection to decentralized peripheral systems (e.g. ET200pro);Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;With escape release;Approach directions A, B and C (delivery state)


Manufacturer warranty

127640 Euchner

$922.38

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$922.38

$922.38 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 127640 with other products

Weight

Series

Product Class

Discrepancy time

Mission time

PFHD

Category

Repeat accuracy R

Performance Level

Turn-on time

For the approval acc. to ...

Additional feature

Output voltage

Off-state current Ir

Type of output

Switching current

Switching load

Safety class

EMC protection requiremen...

Solenoid duty cycle

Connection rating

Degree of contamination (...

Rated impulse withstand v...

Fusing

Rated insulation voltage ...

Solenoid operating voltag...

Test pulses

Utilization category acc....

Operating voltage DC

Current consumption

Test-pulse interval

Extraction force

Overtravel

Guard locking principle

Actuating force

Locking force FZh

Retention force

Approach speed

Locking force Fmax

Connection

Housing material

Ready delay

Ambient temperature

Installation orientation

Mechanical life

Switching frequency

Degree of protection

Shock and vibration resis...

Risk time according to EN...

Extension of risk time ac...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

127640
0 in stock
127640
Euchner

127640 Euchner - Transponder-coded safety switch CTP-AP, 2 x M12, with escape release

Weight1.72842208 lb

SeriesCTP-AP

Product ClassSafety System

Discrepancy timemax.10 ms In acc. with EN ...

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Repeat accuracy R10 %

Performance LevelPL e

Turn-on timemax.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Additional featureEscape release actuated by p...

Output voltageUB-1,5 ... UB V DC

Off-state current Irmax.0,25 mA

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle100 %

Connection rating6 W

Degree of contamination (external, according to EN 60947-1)3

Rated impulse withstand voltage Uimp0,5 kV

Fusing0,5 ... 8 A

Rated insulation voltage Ui50 V

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Test pulsesmax.0,3 ms (Applies for a l...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption40 mA

Test-pulse intervalmin.100 ms

Extraction force20 N

Overtravel5 mm

Guard locking principleClosed-circuit current princ...

Actuating force10 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Retention force20 N

Approach speedmax.20 m/min

Locking force Fmax3900 N

Connection2 plug connectors M12, 5-pin...

Housing materialDie-cast zinc

Ready delaymax.1 s

Ambient temperature-20 ... +55 °C

Installation orientationAny

Mechanical life1 x 10⁶

Switching frequencymax.0,5 Hz

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Discrepancy timemax.10 ms In acc. with EN ...

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Repeat accuracy R10 %

Performance LevelPL e

Turn-on timemax.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Additional featureEscape release actuated by p...

Output voltage0,8xUB ... UB V DC

Off-state current Irmax.0,25 mA

Type of outputp-switching, short circuit-p...

Switching current1 ... 50 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle100 %

Connection rating6 W

Degree of contamination (external, according to EN 60947-1)3

Rated impulse withstand voltage Uimp0,5 kV

Fusing0,25 ... 8 A

Rated insulation voltage Ui50 V

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Test pulsesmax.1,0 ms (Applies for a l...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption40 mA

Test-pulse intervalmin.140 ms

Extraction force20 N

Overtravel5 mm

Guard locking principleClosed-circuit current princ...

Actuating force10 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Retention force20 N

Approach speedmax.20 m/min

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Housing materialDie-cast zinc

Ready delay8 s

Ambient temperature-20 ... +55 °C

Installation orientationAny

Mechanical life1 x 10⁶

Switching frequencymax.0,5 Hz

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Risk time according to EN 60947-5-3max.260 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Discrepancy timemax.10 ms In acc. with EN ...

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Repeat accuracy R10 %

Performance LevelPL e

Turn-on timemax.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Additional feature-

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Type of output2 semiconductor outputs, p-s...

Switching current1 ... 150 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle-

Connection rating1 W

Degree of contamination (external, according to EN 60947-1)3

Rated impulse withstand voltage Uimp0,5 kV

Fusing0,25 ... 8 A

Rated insulation voltage Ui50 V

Solenoid operating voltage DC-

Test pulsesmax.0,3 ms (Applies for a l...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption40 mA

Test-pulse intervalmin.100 ms

Extraction force20 N

Overtravel5 mm

Guard locking principle-

Actuating force10 N

Locking force FZh-

Retention force-

Approach speedmax.20 m/min

Locking force Fmax-

Connection2 plug connectors M12, 5-pin

Housing materialFiber glass reinforced therm...

Ready delaymax.1 s

Ambient temperature-20 ... +55 °C

Installation orientationDoor hinge DIN right

Mechanical life1 x 10⁶

Switching frequencymax.0,5 Hz

Degree of protectionIP65 (Screwed tight plug co...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 127640?
The price of 127640 on MQ Automation is $922.38. Order now.

Out if stock but available for backorder.

127640 Euchner - Transponder-coded safety switch CTP-AP, 2 x M12, with escape release

Similar products from: Safety Switches

What can I help you find today?

Recommended parts