126874 Euchner Electronic Components

Product Details

• B10D
  0,13 x 10⁶
• Mission time
  20 y
• PFHD
  4.1 x 10 ⁻⁹
• Performance Level
  PL e
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures see operating instructions
• Additional feature
  Incl. cover set ID. No. 120344
• Switching element
  2 pos. driven NC
• Power supply
  24 V
• Operating current
  1 ... 50 mA
• Version
  Emergency stop
• Repeat accuracy R
  10 %
• Turn-on time
  max.400 ms
• Operating voltage
  UB V
• Discrepancy time
  max.10 ms In acc. with EN IEC 60947-5-3
• Off-state current Ir
  max.0,25 mA
• Switching current
  1 ... 150 mA
• Output voltage
  UB-1,5 ... UB V DC
• Type of output
  2 semiconductor outputs, p-switching, short circuit-proof
• Risk time according to EN 60947-5-3
  max.260 ms
Switching load
24V DC, class 2 (Alternatively see operating instructions)
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In acc. with EN IEC 60947-5-3
Solenoid duty cycle
100 %
Connection rating
6 W
Rated insulation voltage Ui
50 V
Fusing
0,5 ... 8 A
Current consumption
40 mA
Test pulses
max.1,0 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Test-pulse interval
min.140 ms
Rated impulse withstand voltage Uimp
0,5 kV
Solenoid operating voltage DC
24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Operating voltage DC
24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Extraction force
20 N
Overtravel
5 mm
Actuating force
10 N
Retention force
20 N
Locking force FZh
3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
Locking force Fmax
3900 N
Guard locking principle
Closed-circuit current principle
Approach speed
max.20 m/min
Connection
1 plug connector M23, 19-pin, RC18
Switching frequency
max.0,5 Hz
Housing material
Die-cast zinc
Weight
0,5 kg
Degree of protection
IP65 (Screwed tight plug connector/mating component)
Installation orientation
Any
Ambient temperature
-20 ... +55 °C
Ready delay
8 s
Mechanical life
1 x 10⁶
Shock and vibration resistance
In acc. with EN 60947-5-3