124727 Euchner Safety Switches

124727 on MQ Automation
Euchner
  • 124727
  • 124727
  • 124727

Part#:124727

Alt. Part#:CTP-L1-AP-M-HA-AZ-SA-124727

Manufacturer:Euchner

Category:Safety Switches

Product Lifecycle:Active

Only 3 left in stock. Order Now!

Mar 15, 2025

Product description

124727 Euchner - Transponder-coded safety switch CTP-AP, M12

Product Details

  • Weight
    1.322772 lb
  • Series
    CTP-AP
  • Product Class
    Safety System
  • Performance Level
    PL e
  • PFHD
    4.1 x 10 ⁻⁹
  • Category
    4
  • Mission time
    20 y
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Turn-on time
    max.400 ms
  • Repeat accuracy R
    10 %
  • Discrepancy time
    max.10 ms In acc. with EN IEC 60947-5-3
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    UB-1,5 ... UB V DC
  • Switching current
    1 ... 150 mA
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching load
    24V DC, class 2 (Alternatively see operating instructions)
  • Safety class
    III
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Connection rating
    6 W
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Solenoid duty cycle
    100 %
  • Rated impulse withstand voltage Uimp
    0,5 kV
  • Rated insulation voltage Ui
    50 V
  • Fusing
    0,25 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    40 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Overtravel
    5 mm
  • Test pulses
    max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
  • Test-pulse interval
    min.100 ms
  • Actuating force
    10 N
  • Retention force
    20 N
  • Extraction force
    20 N
  • Locking force Fmax
    3900 N
  • Approach speed
    max.20 m/min
  • Locking force FZh
    3000 N (Fzh = Fmax/1.3 Depending on the actuator used)
  • Guard locking principle
    Closed-circuit current principle
  • Connection
    1 plug connector M12, 8-pin
  • Switching frequency
    max.0,5 Hz
  • Installation orientation
    Any
  • Housing material
    Die-cast zinc
  • Weight
    0,42 kg
  • Degree of protection
    IP67/IP69/IP69K (Screwed tight plug connector/mating component)
  • Ready delay
    max.1 s
  • Mechanical life
    1 x 10⁶
  • Ambient temperature
    -20 ... +55 °C
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 124727 on MQ Automation is $660.14. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Short circuit monitoring;2 safety outputs (semiconductor outputs);Up to category 4 / PL e according to EN ISO 13849-1;With plug connector M12;Multicode;Door monitoring output;Approach directions A, B and C (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

124727 Euchner

$660.14

Your price can be lower.
Log in or Create account to check your discount

Stock:

3

Select Qty:

$660.14

$660.14 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 124727 with other products

Weight

Series

Product Class

Performance Level

PFHD

Category

Mission time

For the approval acc. to ...

Turn-on time

Repeat accuracy R

Discrepancy time

Off-state current Ir

Output voltage

Switching current

Type of output

Switching load

Safety class

Degree of contamination (...

Connection rating

EMC protection requiremen...

Solenoid duty cycle

Rated impulse withstand v...

Rated insulation voltage ...

Fusing

Solenoid operating voltag...

Utilization category acc....

Current consumption

Operating voltage DC

Overtravel

Test pulses

Test-pulse interval

Actuating force

Retention force

Extraction force

Locking force Fmax

Approach speed

Locking force FZh

Guard locking principle

Connection

Switching frequency

Installation orientation

Housing material

Degree of protection

Ready delay

Mechanical life

Ambient temperature

Shock and vibration resis...

Additional feature

Risk time according to EN...

Extension of risk time ac...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

124727
3 in stock
124727
Euchner

124727 Euchner - Transponder-coded safety switch CTP-AP, M12

Weight1.322772 lb

SeriesCTP-AP

Product ClassSafety System

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

Category4

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltageUB-1,5 ... UB V DC

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Connection rating6 W

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle100 %

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Overtravel5 mm

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Retention force20 N

Extraction force20 N

Locking force Fmax3900 N

Approach speedmax.20 m/min

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Guard locking principleClosed-circuit current princ...

Connection1 plug connector M12, 8-pin

Switching frequencymax.0,5 Hz

Installation orientationAny

Housing materialDie-cast zinc

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Ready delaymax.1 s

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

Category4

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltage0,8xUB ... UB V DC

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Connection rating6 W

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle100 %

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Overtravel5 mm

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Retention force20 N

Extraction force20 N

Locking force Fmax3900 N

Approach speedmax.20 m/min

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Guard locking principleClosed-circuit current princ...

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Installation orientationAny

Housing materialDie-cast zinc

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Ready delay8 s

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional featureEscape release actuated by p...

Risk time according to EN 60947-5-3max.260 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

Category4

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Turn-on timemax.400 ms

Repeat accuracy R10 %

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Connection rating1 W

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid duty cycle-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Overtravel5 mm

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Retention force-

Extraction force20 N

Locking force Fmax-

Approach speedmax.20 m/min

Locking force FZh-

Guard locking principle-

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Installation orientationDoor hinge DIN right

Housing materialFiber glass reinforced therm...

Degree of protectionIP65 (Screwed tight plug co...

Ready delaymax.1 s

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Risk time according to EN 60947-5-3-

Extension of risk time according to EN 60947-5-3 per device-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 124727?
The price of 124727 on MQ Automation is $660.14. Order now.

Out if stock but available for backorder.

124727 Euchner - Transponder-coded safety switch CTP-AP, M12

Similar products from: Safety Switches

What can I help you find today?

Recommended parts