116285 Euchner Safety Proximity Sensors

116285 on MQ Automation
Euchner
  • 116285
  • 116285
  • 116285

Part#:116285

Alt. Part#:CET4-AR-CRA-AH-50F-SH-116285

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Only 2 left in stock. Order Now!

Mar 15, 2025

Product description

116285 Euchner - Non-contact safety switch CET-AR-..., RC18, with escape release

Product Details

  • Weight
    2.90789378 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • PFHD
    3.1 x 10⁻⁹
  • Mission time
    20 y
  • Performance Level
    PL e
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Repeat accuracy R
    10 %
  • Input voltage
    15 ... 27,6 V DC
  • Switching delay from state change
    max.400 ms
  • Discrepancy time
    max.10 ms
  • Turn-on time
    400 ms
  • Off-state current Ir
    max.0,25 mA
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Output voltage
    UB-1,5V ... UB V DC
  • Switching current
    1 ... 200 mA
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Safety class
    III
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV2/CYJV8) or (CYJV/CYJV7))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Current consumption
    80 mA
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Fusing
    0,25 ... 8 A
  • Connection rating
    11 W
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Connection
    1 plug connector M23, 19-pin, RC18
  • Operating voltage DC
    24 V DC -15% ... 10%
  • Guard locking principle
    Open-circuit current principle
  • Switching frequency
    max.0,5 Hz
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Locking force Fmax
    6500 N
  • Approach speed
    max.20 m/min
  • Installation orientation
    Any (Preferably head downward)
  • Ready delay
    10 s
  • Degree of protection
    IP65/IP67 (Screwed tight plug connector/mating component)
  • Mechanical life
    1 x 10⁶
  • Ambient temperature
    -20 ... 55 °C
  • Weight
    1 kg
  • Housing material
    Die-cast aluminum
  • Degree of freedom Y
    ±5 mm
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom X
    ±5 mm
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 116285 on MQ Automation is $1,164.06. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With plug connector M23 (RC18);Unicode;Door monitoring output;Teach-in input;Escape release, 75 mm long;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

116285 Euchner

$1,164.06

Your price can be lower.
Log in or Create account to check your discount

Stock:

2

Select Qty:

$1,164.06

$1,164.06 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 116285 with other products

Weight

Series

Product Class

PFHD

Mission time

Performance Level

Category

For the approval acc. to ...

Repeat accuracy R

Input voltage

Switching delay from stat...

Discrepancy time

Turn-on time

Off-state current Ir

Risk time according to EN...

Output voltage

Switching current

Type of output

Extension of risk time ac...

Switching load

Safety class

Connecting cable

Degree of contamination (...

Current consumption

Solenoid duty cycle

EMC protection requiremen...

Fusing

Connection rating

Utilization category acc....

Solenoid operating voltag...

Connection

Operating voltage DC

Guard locking principle

Switching frequency

Locking force FZh

Locking force Fmax

Approach speed

Installation orientation

Ready delay

Degree of protection

Mechanical life

Ambient temperature

Housing material

Degree of freedom Y

Degree of freedom Z

Degree of freedom X

Shock and vibration resis...

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

116285
2 in stock
116285
Euchner

116285 Euchner - Non-contact safety switch CET-AR-..., RC18, with escape release

Weight2.90789378 lb

SeriesCET-AR

Product ClassSafety System

PFHD3.1 x 10⁻⁹

Mission time20 y

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Input voltage15 ... 27,6 V DC

Switching delay from state changemax.400 ms

Discrepancy timemax.10 ms

Turn-on time400 ms

Off-state current Irmax.0,25 mA

Risk time according to EN 60947-5-3max.400 ms

Output voltageUB-1,5V ... UB V DC

Switching current1 ... 200 mA

Type of output2 semiconductor outputs, p-s...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (For altern...

Safety classIII

Connecting cable30V DC, 2A (For UL requirem...

Degree of contamination (external, according to EN 60947-1)3

Current consumption80 mA

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Connection rating11 W

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Connection1 plug connector M23, 19-pin...

Operating voltage DC24 V DC -15% ... 10%

Guard locking principleOpen-circuit current princip...

Switching frequencymax.0,5 Hz

Locking force FZh5000 N (FZH = FMAX/1.3)

Locking force Fmax6500 N

Approach speedmax.20 m/min

Installation orientationAny (Preferably head downwa...

Ready delay10 s

Degree of protectionIP65/IP67 (Screwed tight pl...

Mechanical life1 x 10⁶

Ambient temperature-20 ... 55 °C

Housing materialDie-cast aluminum

Degree of freedom Y±5 mm

Degree of freedom Z±4 mm

Degree of freedom X±5 mm

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Input voltage-

Switching delay from state change-

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Risk time according to EN 60947-5-3max.260 ms

Output voltage0,8xUB ... UB V DC

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Current consumption40 mA

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Connection rating6 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Connection2 plug connectors M12, 5 and...

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleClosed-circuit current princ...

Switching frequencymax.0,5 Hz

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Approach speedmax.20 m/min

Installation orientationAny

Ready delay8 s

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Housing materialDie-cast zinc

Degree of freedom Y-

Degree of freedom Z-

Degree of freedom X-

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Input voltage-

Switching delay from state change-

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Risk time according to EN 60947-5-3-

Output voltage0 ... 1 V DC

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Extension of risk time according to EN 60947-5-3 per device-

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Current consumption40 mA

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Fusing0,25 ... 8 A

Connection rating1 W

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Solenoid operating voltage DC-

Connection2 plug connectors M12, 5-pin

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principle-

Switching frequencymax.0,5 Hz

Locking force FZh-

Locking force Fmax-

Approach speedmax.20 m/min

Installation orientationDoor hinge DIN right

Ready delaymax.1 s

Degree of protectionIP65 (Screwed tight plug co...

Mechanical life1 x 10⁶

Ambient temperature-20 ... +55 °C

Housing materialFiber glass reinforced therm...

Degree of freedom Y-

Degree of freedom Z-

Degree of freedom X-

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 116285?
The price of 116285 on MQ Automation is $1,164.06. Order now.

Out if stock but available for backorder.

116285 Euchner - Non-contact safety switch CET-AR-..., RC18, with escape release

What can I help you find today?

Recommended parts