115419 Euchner Safety Accessories
Part#:115419
Alt. Part#:MGB-L1B-PNC-R-115419
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
115419 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) with 3 control elements, push-pull plug, RC12
Product Details
- Weight 7.8704934 lb
- Series Spare parts
- Product Class Accessories
- Diagnostic Coverage (DC) 99
- PFHD 4.1 x 10⁻⁸
- Mission time 20
- Safety Integrity Level SIL 3 (EN 62061:2005)
- B10D (According to manufacturer’s specifications)
- Performance Level PL e
- Category 4
- Product version number V3.30.10
- Switching element 1NO
- Assignment diagram L0
- Version Illuminated push buttons
- Color Yellow
- Bus data protocol Profinet (IEC 61158 type 10)
- Safety data protocol Profisafe (IEC 61784-3-3)
- Assured release distance Sar max.65 mm
- Transponder coding Multicode
- Fusing min.1 A Slow blow
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Safety class III
- Degree of contamination (external, according to EN 60947-1) 3
- Connecting cable Profinet I/O cable, at least cat. 5e
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Maximum feed-in current in the connection block max.4000 mA
- Rated insulation voltage Ui 75 V
- Current consumption max.500 mA
- Locking force FZh 2000 N
- Rated impulse withstand voltage Uimp 0,5 kV
- Connection Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Guard locking principle Closed-circuit current principle
- Switching frequency 0,25 Hz
- Degree of protection IP54
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Ambient temperature -20 ... 55 °C
- Installation orientation Door hinge DIN right
- Shock and vibration resistance In acc. with EN 60947-5-3
- Reaction time max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Mechanical life 0,1 x 10⁶
- Weight 3,1 kg
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 115419 on MQ Automation is $3,018.55. Order now.
About the product
Guard locking with guard lock monitoring;3 illuminated pushbuttons;including adhesive labels;Push-pull plug;including terminal plug for enabling switch (RC12, 12-pin);Pre-assembled on mounting plates;Integrated Profinet RT switch;Multicode
Manufacturer warranty
115419 Euchner
$3,018.55
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,018.55
$3,018.55 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 115419 with other products
Weight
Series
Product Class
Diagnostic Coverage (DC)
PFHD
Mission time
Safety Integrity Level
B10D
Performance Level
Category
Product version number
Switching element
Assignment diagram
Version
Color
Bus data protocol
Safety data protocol
Assured release distance ...
Transponder coding
Fusing
Auxiliary voltage DC
Operating voltage DC
Safety class
Degree of contamination (...
Connecting cable
EMC protection requiremen...
Maximum feed-in current i...
Rated insulation voltage ...
Current consumption
Locking force FZh
Rated impulse withstand v...
Connection
Guard locking principle
Switching frequency
Degree of protection
Housing material
Ambient temperature
Installation orientation
Shock and vibration resis...
Reaction time
Mechanical life
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Additional feature
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
115419
Euchner
115419 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) wi...
Weight7.8704934 lb
SeriesSpare parts
Product ClassAccessories
Diagnostic Coverage (DC)99
PFHD4.1 x 10⁻⁸
Mission time20
Safety Integrity LevelSIL 3 (EN 62061:2005)
B10D(According to manufacturer’s...
Performance LevelPL e
Category4
Product version numberV3.30.10
Switching element1NO
Assignment diagramL0
VersionIlluminated push buttons
ColorYellow
Bus data protocolProfinet (IEC 61158 type 10)
Safety data protocolProfisafe (IEC 61784-3-3)
Assured release distance Sarmax.65 mm
Transponder codingMulticode
Fusingmin.1 A Slow blow
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Operating voltage DC24 V DC -15% ... 10% ((Re...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Connecting cableProfinet I/O cable, at least...
EMC protection requirementsIn accordance with EN 61000-...
Maximum feed-in current in the connection blockmax.4000 mA
Rated insulation voltage Ui75 V
Current consumptionmax.500 mA
Locking force FZh2000 N
Rated impulse withstand voltage Uimp0,5 kV
ConnectionPush-pull RJ45 (X4 (The doc...
Guard locking principleClosed-circuit current princ...
Switching frequency0,25 Hz
Degree of protectionIP54
Housing materialReinforced plastic, die-cast...
Ambient temperature-20 ... 55 °C
Installation orientationDoor hinge DIN right
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction timemax.550 ms Switch-off time...
Mechanical life0,1 x 10⁶
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Mission time20 y
Safety Integrity Level-
B10D0,13 x 10⁶
Performance LevelPL e
Category4
Product version number-
Switching element2 pos. driven NC
Assignment diagram-
VersionEmergency stop
Color-
Bus data protocol-
Safety data protocol-
Assured release distance Sar-
Transponder coding-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Connecting cable-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Current consumption40 mA
Locking force FZh-
Rated impulse withstand voltage Uimp0,5 kV
Connection2 plug connectors M12, 5-pin
Guard locking principle-
Switching frequencymax.0,5 Hz
Degree of protectionIP65 (Screwed tight plug co...
Housing materialFiber glass reinforced therm...
Ambient temperature-20 ... +55 °C
Installation orientationDoor hinge DIN right
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Mechanical life1 x 10⁶
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Mission time20 y
Safety Integrity Level-
B10D-
Performance LevelPL e
Category4
Product version number-
Switching element-
Assignment diagram-
Version-
Color-
Bus data protocol-
Safety data protocol-
Assured release distance Sar-
Transponder coding-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Safety classIII
Degree of contamination (external, according to EN 60947-1)3
Connecting cable-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Current consumption40 mA
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Rated impulse withstand voltage Uimp0,5 kV
Connection2 plug connectors M12, 5 and...
Guard locking principleClosed-circuit current princ...
Switching frequencymax.0,5 Hz
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Housing materialDie-cast zinc
Ambient temperature-20 ... +55 °C
Installation orientationAny
Shock and vibration resistanceIn acc. with EN 60947-5-3
Reaction time-
Mechanical life1 x 10⁶
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Additional featureEscape release actuated by p...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 115419?
The price of 115419 on MQ Automation is $3,018.55. Order now.
Out if stock but available for backorder.
115419 Euchner - Evaluation module and bus module MGB-L1...-PN... (guard locking by spring force) with 3 control elements, push-pull plug, RC12
Similar products from: Safety Accessories
What can I help you find today?
