115150 Euchner Electronic Components

Product Details

• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.16 mm
• Assured release distance Sar
  max.77 mm
• Operating distance
  26 mm
• PFHD
  4.1 x 10⁻⁹
• Mission time
  20
• Performance Level
  PL e
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Additional feature
  Rubber support included
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Rated conditional short-circuit current
  100 A
• Off-state current Ir
  max.0,25 mA
• Output voltage
  0 ... 1 V DC
• Utilization category acc. to EN 60947-5-2
  24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Switching current
  1 ... 150 mA
• Type of output
  Semiconductor outputs, p-switching, short circuit-proof
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Test-pulse interval
  min.100 ms
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
Turn-on time
max.300 ms
Risk time according to EN 60947-5-3
max.260 ms
EMC protection requirements
In acc. with EN IEC 60947-5-3
Rated insulation voltage Ui
300 V
Rated impulse withstand voltage Uimp
1,5 kV
Fusing
0,25 ... 8 A
Current consumption
max.35 mA
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
Mounting method
Surface mounting on metal
Ready delay
0,5 s
Switching frequency
max.1 Hz
Tightening torque
max.0,8 Nm
Installation orientation
Any
Connection
PUR cable 100mm with plug connector M12x1, 5-pin, pin 5 not used
Mounting distance
min.80 mm
Static bending radius
5 x cable diameter
Degree of protection
IP67
Weight
0,05 kg
Housing material
Plastic, PBT
Shock and vibration resistance
In acc. with EN 60947-5-3
Material
NBR 80 ±5 Shore
Dynamic bending radius
10 x cable diameter
Cable ambient temperature (dynamic)
-25 ... 65 °C
Cable ambient temperature (static)
-25 ... 65 °C