114650 Euchner Safety Proximity Sensors

114650 on MQ Automation
Euchner
  • 114650
  • 114650
  • 114650

Part#:114650

Alt. Part#:CET4-AR-CRA-CH-50F-SG-114650

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

114650 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

Product Details

  • Weight
    2.97403238 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Repeat accuracy R
    10 %
  • PFHD
    3.1 x 10⁻⁹
  • Mission time
    20 y
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Category
    4
  • Performance Level
    PL e
  • Discrepancy time
    max.10 ms
  • Turn-on time
    400 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Off-state current Ir
    max.0,25 mA
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Switching delay from state change
    max.700 ms
  • Output voltage
    0,8xUB ... UB V DC
  • Switching current
    1 ... 50 mA
  • Type of output
    p-switching, short circuit-proof
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Safety class
    III
  • Solenoid duty cycle
    100 %
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Connection rating
    11 W
  • Fusing
    0,25 ... 8 A
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    80 mA
  • Locking force Fmax
    6500 N
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Guard locking principle
    Open-circuit current principle
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Approach speed
    max.20 m/min
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    10 s
  • Installation orientation
    Any (Preferably head downward)
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom X
    ±5 mm
  • Degree of freedom Y
    ±5 mm
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Housing material
    Die-cast aluminum
  • Weight
    1 kg
  • Ambient temperature
    -20 ... 55 °C
  • Mechanical life
    1 x 10⁶

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 114650 on MQ Automation is $1,083.14. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Door monitoring output;Indication of the door position by LED;Escape release, 75 mm long;Approach direction A (delivery state)


Manufacturer warranty

114650 Euchner

$1,083.14

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$1,083.14

$1,083.14 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 114650 with other products

Weight

Series

Product Class

Repeat accuracy R

PFHD

Mission time

For the approval acc. to ...

Category

Performance Level

Discrepancy time

Turn-on time

Risk time according to EN...

Off-state current Ir

Extension of risk time ac...

Switching delay from stat...

Output voltage

Switching current

Type of output

Switching load

Safety class

Solenoid duty cycle

Connecting cable

Degree of contamination (...

Connection rating

Fusing

EMC protection requiremen...

Solenoid operating voltag...

Utilization category acc....

Current consumption

Locking force Fmax

Locking force FZh

Operating voltage DC

Guard locking principle

Connection

Approach speed

Switching frequency

Ready delay

Installation orientation

Shock and vibration resis...

Degree of freedom Z

Degree of freedom X

Degree of freedom Y

Degree of protection

Housing material

Ambient temperature

Mechanical life

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

114650
0 in stock
114650
Euchner

114650 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

Weight2.97403238 lb

SeriesCET-AR

Product ClassSafety System

Repeat accuracy R10 %

PFHD3.1 x 10⁻⁹

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Performance LevelPL e

Discrepancy timemax.10 ms

Turn-on time400 ms

Risk time according to EN 60947-5-3max.400 ms

Off-state current Irmax.0,25 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching delay from state changemax.700 ms

Output voltage0,8xUB ... UB V DC

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (For altern...

Safety classIII

Solenoid duty cycle100 %

Connecting cable30V DC, 2A (For UL requirem...

Degree of contamination (external, according to EN 60947-1)3

Connection rating11 W

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption80 mA

Locking force Fmax6500 N

Locking force FZh5000 N (FZH = FMAX/1.3)

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleOpen-circuit current princip...

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Switching frequencymax.0,5 Hz

Ready delay10 s

Installation orientationAny (Preferably head downwa...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Z±4 mm

Degree of freedom X±5 mm

Degree of freedom Y±5 mm

Degree of protectionIP67 (Screwed tight plug co...

Housing materialDie-cast aluminum

Ambient temperature-20 ... 55 °C

Mechanical life1 x 10⁶

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Repeat accuracy R10 %

PFHD4.1 x 10 ⁻⁹

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Performance LevelPL e

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Off-state current Irmax.0,25 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching delay from state change-

Output voltage0,8xUB ... UB V DC

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Solenoid duty cycle100 %

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Connection rating6 W

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force Fmax3900 N

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleClosed-circuit current princ...

Connection2 plug connectors M12, 5 and...

Approach speedmax.20 m/min

Switching frequencymax.0,5 Hz

Ready delay8 s

Installation orientationAny

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Z-

Degree of freedom X-

Degree of freedom Y-

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Housing materialDie-cast zinc

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Repeat accuracy R10 %

PFHD4.1 x 10 ⁻⁹

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Category4

Performance LevelPL e

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3-

Off-state current Irmax.0,25 mA

Extension of risk time according to EN 60947-5-3 per device-

Switching delay from state change-

Output voltage0 ... 1 V DC

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Solenoid duty cycle-

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Connection rating1 W

Fusing0,25 ... 8 A

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force Fmax-

Locking force FZh-

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principle-

Connection2 plug connectors M12, 5-pin

Approach speedmax.20 m/min

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Z-

Degree of freedom X-

Degree of freedom Y-

Degree of protectionIP65 (Screwed tight plug co...

Housing materialFiber glass reinforced therm...

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

FAQ

What is the price of 114650?
The price of 114650 on MQ Automation is $1,083.14. Order now.

Out if stock but available for backorder.

114650 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

What can I help you find today?

Recommended parts