114398 Euchner Safety Locking Systems
Part#:114398
Alt. Part#:MGB-L2B-PNC-R-114398
Manufacturer:Euchner
Category:Safety Locking Systems
Product Lifecycle:Active
Product description
114398 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug, RC12
Product Details
- Weight 7.87710726 lb
- Series MGB-PN (Profinet)
- Product Class Safety System
- Mission time 20
- Diagnostic Coverage (DC) 99
- Safety Integrity Level SIL 3 (EN 62061:2005)
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Performance Level PL e
- B10D (According to manufacturer’s specifications)
- Category 4
- Product version number V3.30.10
- Switching element 1NO
- Color Red
- Version Illuminated push buttons
- Assignment diagram L0
- Safety data protocol Profisafe (IEC 61784-3-3)
- Bus data protocol Profinet (IEC 61158 type 10)
- Assured release distance Sar max.65 mm
- Fusing min.1 A Slow blow
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Transponder coding Multicode
- Safety class III
- Connecting cable Profinet I/O cable, at least cat. 5e
- Degree of contamination (external, according to EN 60947-1) 3
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Rated impulse withstand voltage Uimp 0,5 kV
- Current consumption max.500 mA
- Maximum feed-in current in the connection block max.4000 mA
- Rated insulation voltage Ui 75 V
- Locking force FZh 2000 N
- Installation orientation Door hinge DIN right
- Reaction time max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Mechanical life 0,1 x 10⁶
- Shock and vibration resistance In acc. with EN 60947-5-3
- Connection Push-pull RJ45 (X3 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Guard locking principle Open-circuit current principle
- Switching frequency 0,25 Hz
- Ambient temperature -20 ... 55 °C
- Degree of protection IP54
- Weight 3,1 kg
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 114398 on MQ Automation is $3,018.55. Order now.
About the product
Guard locking with guard lock monitoring;3 illuminated pushbuttons;including adhesive labels;Push-pull plug;including terminal plug for enabling switch (RC12, 12-pin);Pre-assembled on mounting plates;Integrated Profinet RT switch;Multicode
Manufacturer warranty
114398 Euchner
$3,018.55
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$3,018.55
$3,018.55 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 114398 with other products
Weight
Series
Product Class
Mission time
Diagnostic Coverage (DC)
Safety Integrity Level
PFHD
Performance Level
B10D
Category
Product version number
Switching element
Color
Version
Assignment diagram
Safety data protocol
Bus data protocol
Assured release distance ...
Fusing
Auxiliary voltage DC
Operating voltage DC
Transponder coding
Safety class
Connecting cable
Degree of contamination (...
EMC protection requiremen...
Rated impulse withstand v...
Current consumption
Maximum feed-in current i...
Rated insulation voltage ...
Locking force FZh
Installation orientation
Reaction time
Mechanical life
Shock and vibration resis...
Connection
Guard locking principle
Switching frequency
Ambient temperature
Degree of protection
Housing material
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Additional feature
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
114398
Euchner
114398 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...
Weight7.87710726 lb
SeriesMGB-PN (Profinet)
Product ClassSafety System
Mission time20
Diagnostic Coverage (DC)99
Safety Integrity LevelSIL 3 (EN 62061:2005)
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Performance LevelPL e
B10D(According to manufacturer’s...
Category4
Product version numberV3.30.10
Switching element1NO
ColorRed
VersionIlluminated push buttons
Assignment diagramL0
Safety data protocolProfisafe (IEC 61784-3-3)
Bus data protocolProfinet (IEC 61158 type 10)
Assured release distance Sarmax.65 mm
Fusingmin.1 A Slow blow
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Operating voltage DC24 V DC -15% ... 10% ((Re...
Transponder codingMulticode
Safety classIII
Connecting cableProfinet I/O cable, at least...
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn accordance with EN 61000-...
Rated impulse withstand voltage Uimp0,5 kV
Current consumptionmax.500 mA
Maximum feed-in current in the connection blockmax.4000 mA
Rated insulation voltage Ui75 V
Locking force FZh2000 N
Installation orientationDoor hinge DIN right
Reaction timemax.550 ms Switch-off time...
Mechanical life0,1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
ConnectionPush-pull RJ45 (X3 (The doc...
Guard locking principleOpen-circuit current princip...
Switching frequency0,25 Hz
Ambient temperature-20 ... 55 °C
Degree of protectionIP54
Housing materialReinforced plastic, die-cast...
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Diagnostic Coverage (DC)-
Safety Integrity Level-
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
B10D0,13 x 10⁶
Category4
Product version number-
Switching element2 pos. driven NC
Color-
VersionEmergency stop
Assignment diagram-
Safety data protocol-
Bus data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Safety classIII
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp0,5 kV
Current consumption40 mA
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Locking force FZh-
Installation orientationDoor hinge DIN right
Reaction time-
Mechanical life1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
Connection2 plug connectors M12, 5-pin
Guard locking principle-
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
Degree of protectionIP65 (Screwed tight plug co...
Housing materialFiber glass reinforced therm...
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Diagnostic Coverage (DC)-
Safety Integrity Level-
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
B10D-
Category4
Product version number-
Switching element-
Color-
Version-
Assignment diagram-
Safety data protocol-
Bus data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Safety classIII
Connecting cable-
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp0,5 kV
Current consumption40 mA
Maximum feed-in current in the connection block-
Rated insulation voltage Ui50 V
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Installation orientationAny
Reaction time-
Mechanical life1 x 10⁶
Shock and vibration resistanceIn acc. with EN 60947-5-3
Connection2 plug connectors M12, 5 and...
Guard locking principleClosed-circuit current princ...
Switching frequencymax.0,5 Hz
Ambient temperature-20 ... +55 °C
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Housing materialDie-cast zinc
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Additional featureEscape release actuated by p...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 114398?
The price of 114398 on MQ Automation is $3,018.55. Order now.
Out if stock but available for backorder.
114398 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug, RC12
Similar products from: Safety Locking Systems
What can I help you find today?
