113609 Euchner Safety Proximity Sensors

113609 on MQ Automation
Euchner
  • 113609
  • 113609
  • 113609

Part#:113609

Alt. Part#:CET4-AR-CRA-CH-50X-SG-C2355-113609

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

113609 Euchner - Non-contact safety switch CET-AR-..., M12

Product Details

  • Weight
    2.79104892 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    3.1 x 10⁻⁹
  • Performance Level
    PL e
  • Category
    4
  • Repeat accuracy R
    10 %
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Discrepancy time
    max.10 ms
  • Switching delay from state change
    max.400 ms
  • Turn-on time
    400 ms
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    UB-1,5V ... UB V DC
  • Switching current
    1 ... 200 mA
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Safety class
    III
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Solenoid duty cycle
    100 %
  • Installation orientation
    Any (Preferably head downward)
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Fusing
    0,5 ... 8 A
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    80 mA
  • Locking force Fmax
    6500 N
  • Guard locking principle
    Open-circuit current principle
  • Approach speed
    max.20 m/min
  • Ambient temperature
    -20 ... 55 °C
  • Weight
    1 kg
  • Mechanical life
    1 x 10⁶
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    10 s
  • Housing material
    Stainless steel
  • Degree of freedom Z
    ±4 mm
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of freedom Y
    ±5 mm
  • Degree of freedom X
    ±5 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 113609 on MQ Automation is $872.40. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Door monitoring output;Indication of the door position by LED;Approach direction A (delivery state)


Manufacturer warranty

113609 Euchner

$872.40

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$872.40

$872.40 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 113609 with other products

Weight

Series

Product Class

Mission time

PFHD

Performance Level

Category

Repeat accuracy R

For the approval acc. to ...

Risk time according to EN...

Discrepancy time

Switching delay from stat...

Turn-on time

Off-state current Ir

Output voltage

Switching current

Type of output

Extension of risk time ac...

Switching load

Safety class

Connecting cable

Operating voltage DC

Degree of contamination (...

Locking force FZh

Connection

Solenoid duty cycle

Installation orientation

EMC protection requiremen...

Connection rating

Degree of protection

Solenoid operating voltag...

Fusing

Utilization category acc....

Current consumption

Locking force Fmax

Guard locking principle

Approach speed

Ambient temperature

Mechanical life

Switching frequency

Ready delay

Housing material

Degree of freedom Z

Shock and vibration resis...

Degree of freedom Y

Degree of freedom X

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

113609
0 in stock
113609
Euchner

113609 Euchner - Non-contact safety switch CET-AR-..., M12

Weight2.79104892 lb

SeriesCET-AR

Product ClassSafety System

Mission time20 y

PFHD3.1 x 10⁻⁹

Performance LevelPL e

Category4

Repeat accuracy R10 %

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3max.400 ms

Discrepancy timemax.10 ms

Switching delay from state changemax.400 ms

Turn-on time400 ms

Off-state current Irmax.0,25 mA

Output voltageUB-1,5V ... UB V DC

Switching current1 ... 200 mA

Type of output2 semiconductor outputs, p-s...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (For altern...

Safety classIII

Connecting cable30V DC, 2A (For UL requirem...

Operating voltage DC24 V DC -15% ... 15% Rev...

Degree of contamination (external, according to EN 60947-1)3

Locking force FZh5000 N (FZH = FMAX/1.3)

Connection2 plug connectors M12, 5 and...

Solenoid duty cycle100 %

Installation orientationAny (Preferably head downwa...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Degree of protectionIP67 (Screwed tight plug co...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Fusing0,5 ... 8 A

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption80 mA

Locking force Fmax6500 N

Guard locking principleOpen-circuit current princip...

Approach speedmax.20 m/min

Ambient temperature-20 ... 55 °C

Mechanical life1 x 10⁶

Switching frequencymax.0,5 Hz

Ready delay10 s

Housing materialStainless steel

Degree of freedom Z±4 mm

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Y±5 mm

Degree of freedom X±5 mm

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

Repeat accuracy R10 %

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3max.260 ms

Discrepancy timemax.10 ms In acc. with EN ...

Switching delay from state change-

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Output voltage0,8xUB ... UB V DC

Switching current1 ... 50 mA

Type of outputp-switching, short circuit-p...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Connecting cable-

Operating voltage DC24 V DC -15% ... 15% Rev...

Degree of contamination (external, according to EN 60947-1)3

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Connection2 plug connectors M12, 5 and...

Solenoid duty cycle100 %

Installation orientationAny

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force Fmax3900 N

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Switching frequencymax.0,5 Hz

Ready delay8 s

Housing materialDie-cast zinc

Degree of freedom Z-

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Y-

Degree of freedom X-

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Category4

Repeat accuracy R10 %

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3-

Discrepancy timemax.10 ms In acc. with EN ...

Switching delay from state change-

Turn-on timemax.400 ms

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Switching current1 ... 150 mA

Type of output2 semiconductor outputs, p-s...

Extension of risk time according to EN 60947-5-3 per device-

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Connecting cable-

Operating voltage DC24 V DC -15% ... 15% Rev...

Degree of contamination (external, according to EN 60947-1)3

Locking force FZh-

Connection2 plug connectors M12, 5-pin

Solenoid duty cycle-

Installation orientationDoor hinge DIN right

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Degree of protectionIP65 (Screwed tight plug co...

Solenoid operating voltage DC-

Fusing0,25 ... 8 A

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Locking force Fmax-

Guard locking principle-

Approach speedmax.20 m/min

Ambient temperature-20 ... +55 °C

Mechanical life1 x 10⁶

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Housing materialFiber glass reinforced therm...

Degree of freedom Z-

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Y-

Degree of freedom X-

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 113609?
The price of 113609 on MQ Automation is $872.40. Order now.

Out if stock but available for backorder.

113609 Euchner - Non-contact safety switch CET-AR-..., M12

What can I help you find today?

Recommended parts