112082 Euchner Safety Proximity Sensors

112082 on MQ Automation
Euchner
  • 112082
  • 112082
  • 112082

Part#:112082

Alt. Part#:CET4-AP-CRA-AH-50X-SI-112082

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

17 in stock

Mar 15, 2025

Product description

112082 Euchner - Non-contact safety switch CET-AP-..., for connection to decentralized peripheral systems

Product Details

  • Weight
    2.6786133 lb
  • Series
    CET-AP
  • Product Class
    Safety System
  • PFHD
    3.1 x 10⁻⁹
  • Mission time
    20 y
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Performance Level
    PL e
  • Category
    4
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Repeat accuracy R
    10 %
  • Switching current
    1 ... 200 mA
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Discrepancy time
    max.10 ms
  • Turn-on time
    400 ms
  • Safety class
    III
  • Output voltage
    UB-1,5V ... UB V DC
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Fusing
    0,25 ... 8 A
  • Off-state current Ir
    max.0,25 mA
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Solenoid duty cycle
    100 %
  • Degree of contamination (external, according to EN 60947-1)
    3
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Ready delay
    1 s
  • Current consumption
    80 mA
  • Connection
    2 plug connectors M12, 5-pin
  • Switching frequency
    max.0,5 Hz
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Guard locking principle
    Open-circuit current principle
  • Locking force FZh
    5000 N
  • Locking force Fmax
    6500 N
  • Approach speed
    max.20 m/min
  • Degree of freedom X
    ±5 mm
  • Installation orientation
    Any (Preferably head downward)
  • Degree of freedom Z
    ±4 mm
  • Degree of freedom Y
    ±5 mm
  • Mechanical life
    1 x 10⁶
  • Weight
    1 kg
  • Housing material
    Stainless steel
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Ambient temperature
    -20 ... 55 °C
  • Shock and vibration resistance
    In acc. with EN 60947-5-3

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 112082 on MQ Automation is $850.76. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Direct connection to decentralized peripheral systems (e.g. ET200pro);Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;Indication of the door position by LED;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

112082 Euchner

$850.76

Your price can be lower.
Log in or Create account to check your discount

Stock:

17

Select Qty:

$850.76

$850.76 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 112082 with other products

Weight

Series

Product Class

PFHD

Mission time

For the approval acc. to ...

Performance Level

Category

Type of output

Repeat accuracy R

Switching current

Switching load

Discrepancy time

Turn-on time

Safety class

Output voltage

Risk time according to EN...

Fusing

Off-state current Ir

Utilization category acc....

Connecting cable

Solenoid duty cycle

Degree of contamination (...

EMC protection requiremen...

Connection rating

Solenoid operating voltag...

Ready delay

Current consumption

Connection

Switching frequency

Operating voltage DC

Guard locking principle

Locking force FZh

Locking force Fmax

Approach speed

Degree of freedom X

Installation orientation

Degree of freedom Z

Degree of freedom Y

Mechanical life

Housing material

Degree of protection

Ambient temperature

Shock and vibration resis...

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extension of risk time ac...

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

112082
17 in stock
112082
Euchner

112082 Euchner - Non-contact safety switch CET-AP-..., for connection to decentralized peripheral sy...

Weight2.6786133 lb

SeriesCET-AP

Product ClassSafety System

PFHD3.1 x 10⁻⁹

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Performance LevelPL e

Category4

Type of output2 semiconductor outputs, p-s...

Repeat accuracy R10 %

Switching current1 ... 200 mA

Switching load24V DC, class 2 (For altern...

Discrepancy timemax.10 ms

Turn-on time400 ms

Safety classIII

Output voltageUB-1,5V ... UB V DC

Risk time according to EN 60947-5-3max.400 ms

Fusing0,25 ... 8 A

Off-state current Irmax.0,25 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Connecting cable30V DC, 2A (For UL requirem...

Solenoid duty cycle100 %

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Ready delay1 s

Current consumption80 mA

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleOpen-circuit current princip...

Locking force FZh5000 N

Locking force Fmax6500 N

Approach speedmax.20 m/min

Degree of freedom X±5 mm

Installation orientationAny (Preferably head downwa...

Degree of freedom Z±4 mm

Degree of freedom Y±5 mm

Mechanical life1 x 10⁶

Housing materialStainless steel

Degree of protectionIP67 (Screwed tight plug co...

Ambient temperature-20 ... 55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extension of risk time according to EN 60947-5-3 per device-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Performance LevelPL e

Category4

Type of outputp-switching, short circuit-p...

Repeat accuracy R10 %

Switching current1 ... 50 mA

Switching load24V DC, class 2 (Alternativ...

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Safety classIII

Output voltage0,8xUB ... UB V DC

Risk time according to EN 60947-5-3max.260 ms

Fusing0,25 ... 8 A

Off-state current Irmax.0,25 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Connecting cable-

Solenoid duty cycle100 %

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Ready delay8 s

Current consumption40 mA

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleClosed-circuit current princ...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Locking force Fmax3900 N

Approach speedmax.20 m/min

Degree of freedom X-

Installation orientationAny

Degree of freedom Z-

Degree of freedom Y-

Mechanical life1 x 10⁶

Housing materialDie-cast zinc

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

For the approval acc. to UL the following appliesOperation only with UL class...

Performance LevelPL e

Category4

Type of output2 semiconductor outputs, p-s...

Repeat accuracy R10 %

Switching current1 ... 150 mA

Switching load24V DC, class 2 (Alternativ...

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Safety classIII

Output voltage0 ... 1 V DC

Risk time according to EN 60947-5-3-

Fusing0,25 ... 8 A

Off-state current Irmax.0,25 mA

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Connecting cable-

Solenoid duty cycle-

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Solenoid operating voltage DC-

Ready delaymax.1 s

Current consumption40 mA

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principle-

Locking force FZh-

Locking force Fmax-

Approach speedmax.20 m/min

Degree of freedom X-

Installation orientationDoor hinge DIN right

Degree of freedom Z-

Degree of freedom Y-

Mechanical life1 x 10⁶

Housing materialFiber glass reinforced therm...

Degree of protectionIP65 (Screwed tight plug co...

Ambient temperature-20 ... +55 °C

Shock and vibration resistanceIn acc. with EN 60947-5-3

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extension of risk time according to EN 60947-5-3 per device-

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 112082?
The price of 112082 on MQ Automation is $850.76. Order now.

Out if stock but available for backorder.

112082 Euchner - Non-contact safety switch CET-AP-..., for connection to decentralized peripheral systems

What can I help you find today?

Recommended parts