110907 Euchner Safety Proximity Sensors

110907 on MQ Automation
Euchner
  • 110907
  • 110907
  • 110907

Part#:110907

Alt. Part#:CET3-AR-CRA-CH-50F-SG-110907

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

6 in stock

Mar 15, 2025

Product description

110907 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

Product Details

  • Weight
    2.75797962 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Mission time
    20 y
  • PFHD
    3.1 x 10⁻⁹
  • Category
    4
  • Performance Level
    PL e
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Repeat accuracy R
    10 %
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Discrepancy time
    max.10 ms
  • Turn-on time
    400 ms
  • Type of output
    2 semiconductor outputs, p-switching, short circuit-proof
  • Switching delay from state change
    max.400 ms
  • Switching current
    1 ... 200 mA
  • Output voltage
    UB-1,5V ... UB V DC
  • Off-state current Ir
    max.0,25 mA
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Safety class
    III
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Connecting cable
    30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Fusing
    0,25 ... 8 A
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Operating voltage DC
    24 V DC -15% ... 10%
  • Locking force FZh
    5000 N (FZH = FMAX/1.3)
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    80 mA
  • Guard locking principle
    Closed-circuit current principle
  • Approach speed
    max.20 m/min
  • Locking force Fmax
    6500 N
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    10 s
  • Installation orientation
    Any (Preferably head downward)
  • Degree of freedom X
    ±5 mm
  • Degree of freedom Z
    ±4 mm
  • Ambient temperature
    -20 ... 55 °C
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Mechanical life
    1 x 10⁶
  • Housing material
    Stainless steel
  • Weight
    1 kg
  • Shock and vibration resistance
    In acc. with EN 60947-5-3
  • Degree of freedom Y
    ±5 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 110907 on MQ Automation is $1,083.14. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Door monitoring output;Indication of the door position by LED;Escape release, 75 mm long;Approach direction A (delivery state)


This item can ship in 3-5 days!

Manufacturer warranty

110907 Euchner

$1,083.14

Your price can be lower.
Log in or Create account to check your discount

Stock:

6

Select Qty:

$1,083.14

$1,083.14 each

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 110907 with other products

Weight

Series

Product Class

Mission time

PFHD

Category

Performance Level

For the approval acc. to ...

Repeat accuracy R

Risk time according to EN...

Discrepancy time

Turn-on time

Type of output

Switching delay from stat...

Switching current

Output voltage

Off-state current Ir

Switching load

Safety class

Extension of risk time ac...

Connecting cable

Degree of contamination (...

Fusing

Solenoid duty cycle

EMC protection requiremen...

Connection rating

Solenoid operating voltag...

Operating voltage DC

Locking force FZh

Utilization category acc....

Current consumption

Guard locking principle

Approach speed

Locking force Fmax

Connection

Switching frequency

Ready delay

Installation orientation

Degree of freedom X

Degree of freedom Z

Ambient temperature

Degree of protection

Mechanical life

Housing material

Shock and vibration resis...

Degree of freedom Y

Additional feature

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

110907
6 in stock
110907
Euchner

110907 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

Weight2.75797962 lb

SeriesCET-AR

Product ClassSafety System

Mission time20 y

PFHD3.1 x 10⁻⁹

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Risk time according to EN 60947-5-3max.400 ms

Discrepancy timemax.10 ms

Turn-on time400 ms

Type of output2 semiconductor outputs, p-s...

Switching delay from state changemax.400 ms

Switching current1 ... 200 mA

Output voltageUB-1,5V ... UB V DC

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (For altern...

Safety classIII

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Connecting cable30V DC, 2A (For UL requirem...

Degree of contamination (external, according to EN 60947-1)3

Fusing0,25 ... 8 A

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Operating voltage DC24 V DC -15% ... 10%

Locking force FZh5000 N (FZH = FMAX/1.3)

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption80 mA

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Locking force Fmax6500 N

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay10 s

Installation orientationAny (Preferably head downwa...

Degree of freedom X±5 mm

Degree of freedom Z±4 mm

Ambient temperature-20 ... 55 °C

Degree of protectionIP67 (Screwed tight plug co...

Mechanical life1 x 10⁶

Housing materialStainless steel

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Y±5 mm

Additional feature-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Risk time according to EN 60947-5-3max.260 ms

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Type of outputp-switching, short circuit-p...

Switching delay from state change-

Switching current1 ... 50 mA

Output voltage0,8xUB ... UB V DC

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Fusing0,25 ... 8 A

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Guard locking principleClosed-circuit current princ...

Approach speedmax.20 m/min

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay8 s

Installation orientationAny

Degree of freedom X-

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Mechanical life1 x 10⁶

Housing materialDie-cast zinc

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Y-

Additional featureEscape release actuated by p...

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

PFHD4.1 x 10 ⁻⁹

Category4

Performance LevelPL e

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Risk time according to EN 60947-5-3-

Discrepancy timemax.10 ms In acc. with EN ...

Turn-on timemax.400 ms

Type of output2 semiconductor outputs, p-s...

Switching delay from state change-

Switching current1 ... 150 mA

Output voltage0 ... 1 V DC

Off-state current Irmax.0,25 mA

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Extension of risk time according to EN 60947-5-3 per device-

Connecting cable-

Degree of contamination (external, according to EN 60947-1)3

Fusing0,25 ... 8 A

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Solenoid operating voltage DC-

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Guard locking principle-

Approach speedmax.20 m/min

Locking force Fmax-

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Degree of freedom X-

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Degree of protectionIP65 (Screwed tight plug co...

Mechanical life1 x 10⁶

Housing materialFiber glass reinforced therm...

Shock and vibration resistanceIn acc. with EN 60947-5-3

Degree of freedom Y-

Additional feature-

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 110907?
The price of 110907 on MQ Automation is $1,083.14. Order now.

Out if stock but available for backorder.

110907 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

What can I help you find today?

Recommended parts