110241 Euchner Safety Proximity Sensors

110241 on MQ Automation
Euchner
  • 110241
  • 110241
  • 110241

Part#:110241

Alt. Part#:CET1-AR-CRA-CH-50F-SG-110241

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

110241 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

Product Details

  • Weight
    2.95639542 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Mission time
    20 y
  • Category
    4
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Risk time according to EN 60947-5-3
    max.400 ms
  • PFHD
    3.1 x 10⁻⁹
  • Performance Level
    PL e
  • Discrepancy time
    max.10 ms
  • Repeat accuracy R
    10 %
  • Turn-on time
    400 ms
  • Type of output
    Semiconductor outputs, p-switching, short circuit-proof
  • Output current
    1 ... 200 mA
  • Off-state current Ir
    max.0,25 mA
  • Output voltage
    0 ... 1 V DC
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Safety class
    III
  • Solenoid duty cycle
    100 %
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Fusing
    0,5 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Guard locking principle
    Closed-circuit current principle
  • Locking force FZh
    5000 N
  • Current consumption
    450 mA
  • Locking force Fmax
    6500 N
  • Approach speed
    max.20 m/min
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    10 s
  • Installation orientation
    Any (Preferably head downward)
  • Weight
    1 kg
  • Degree of freedom X
    ±5 mm
  • Degree of freedom Y
    ±5 mm
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Mechanical life
    1 x 10⁶
  • Housing material
    Stainless steel
  • Degree of freedom Z
    ±4 mm
  • Ambient temperature
    -20 ... 55 °C

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 110241 on MQ Automation is $1,015.63. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Escape release, 75 mm long;Approach direction A (delivery state)


Manufacturer warranty

110241 Euchner

$1,015.63

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$1,015.63

$1,015.63 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 110241 with other products

Weight

Series

Product Class

Mission time

Category

For the approval acc. to ...

Risk time according to EN...

PFHD

Performance Level

Discrepancy time

Repeat accuracy R

Turn-on time

Type of output

Output current

Off-state current Ir

Output voltage

Extension of risk time ac...

Safety class

Solenoid duty cycle

Switching load

EMC protection requiremen...

Connection rating

Degree of contamination (...

Fusing

Solenoid operating voltag...

Utilization category acc....

Operating voltage DC

Guard locking principle

Locking force FZh

Current consumption

Locking force Fmax

Approach speed

Connection

Switching frequency

Ready delay

Installation orientation

Degree of freedom X

Degree of freedom Y

Degree of protection

Mechanical life

Housing material

Degree of freedom Z

Ambient temperature

Additional feature

Switching current

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

Shock and vibration resis...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

110241
0 in stock
110241
Euchner

110241 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

Weight2.95639542 lb

SeriesCET-AR

Product ClassSafety System

Mission time20 y

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3max.400 ms

PFHD3.1 x 10⁻⁹

Performance LevelPL e

Discrepancy timemax.10 ms

Repeat accuracy R10 %

Turn-on time400 ms

Type of outputSemiconductor outputs, p-swi...

Output current1 ... 200 mA

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Safety classIII

Solenoid duty cycle100 %

Switching load24V DC, class 2 (For altern...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Degree of contamination (external, according to EN 60947-1)3

Fusing0,5 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleClosed-circuit current princ...

Locking force FZh5000 N

Current consumption450 mA

Locking force Fmax6500 N

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay10 s

Installation orientationAny (Preferably head downwa...

Degree of freedom X±5 mm

Degree of freedom Y±5 mm

Degree of protectionIP67 (Screwed tight plug co...

Mechanical life1 x 10⁶

Housing materialStainless steel

Degree of freedom Z±4 mm

Ambient temperature-20 ... 55 °C

Additional feature-

Switching current-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

Shock and vibration resistance-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Mission time20 y

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3max.260 ms

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Type of outputp-switching, short circuit-p...

Output current-

Off-state current Irmax.0,25 mA

Output voltage0,8xUB ... UB V DC

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Safety classIII

Solenoid duty cycle100 %

Switching load24V DC, class 2 (Alternativ...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Degree of contamination (external, according to EN 60947-1)3

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principleClosed-circuit current princ...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Current consumption40 mA

Locking force Fmax3900 N

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay8 s

Installation orientationAny

Degree of freedom X-

Degree of freedom Y-

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Mechanical life1 x 10⁶

Housing materialDie-cast zinc

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Additional featureEscape release actuated by p...

Switching current1 ... 50 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Mission time20 y

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Risk time according to EN 60947-5-3-

PFHD4.1 x 10 ⁻⁹

Performance LevelPL e

Discrepancy timemax.10 ms In acc. with EN ...

Repeat accuracy R10 %

Turn-on timemax.400 ms

Type of output2 semiconductor outputs, p-s...

Output current-

Off-state current Irmax.0,25 mA

Output voltage0 ... 1 V DC

Extension of risk time according to EN 60947-5-3 per device-

Safety classIII

Solenoid duty cycle-

Switching load24V DC, class 2 (Alternativ...

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Degree of contamination (external, according to EN 60947-1)3

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Guard locking principle-

Locking force FZh-

Current consumption40 mA

Locking force Fmax-

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Installation orientationDoor hinge DIN right

Degree of freedom X-

Degree of freedom Y-

Degree of protectionIP65 (Screwed tight plug co...

Mechanical life1 x 10⁶

Housing materialFiber glass reinforced therm...

Degree of freedom Z-

Ambient temperature-20 ... +55 °C

Additional feature-

Switching current1 ... 150 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 110241?
The price of 110241 on MQ Automation is $1,015.63. Order now.

Out if stock but available for backorder.

110241 Euchner - Non-contact safety switch CET-AR-..., M12, with escape release

What can I help you find today?

Recommended parts