109825 Euchner Safety Accessories
Part#:109825
Alt. Part#:MGB-L2B-PN-R-109825
Manufacturer:Euchner
Category:Safety Accessories
Product Lifecycle:Active
Product description
109825 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug
Product Details
- Weight 7.75364854 lb
- Series MGB-PN (Profinet)
- Product Class Accessories
- Mission time 20
- Safety Integrity Level SIL 3 (EN 62061:2005)
- B10D 0,13 x 10⁶
- Diagnostic Coverage (DC) 99
- PFHD 4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
- Performance Level PL e
- Category 4
- Product version number V3.30.10
- Switching element 2 pos. driven NC
- Special features With adhesive ring
- Version Emergency stop illuminated
- Assignment diagram B3
- Bus data protocol Profinet (IEC 61158 type 10)
- Safety data protocol Profisafe (IEC 61784-3-3)
- Assured release distance Sar max.65 mm
- Fusing min.1 A Slow blow
- Auxiliary voltage DC 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
- Operating voltage DC 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
- Transponder coding Multicode
- Degree of contamination (external, according to EN 60947-1) 3
- Safety class III
- Locking force FZh 2000 N
- Connecting cable Profinet I/O cable, at least cat. 5e
- Current consumption max.500 mA
- EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
- Rated insulation voltage Ui 75 V
- Maximum feed-in current in the connection block max.4000 mA
- Rated impulse withstand voltage Uimp 0,5 kV
- Guard locking principle Open-circuit current principle
- Installation orientation Door hinge DIN right
- Housing material Reinforced plastic, die-cast zinc nickel-plated, stainless steel
- Weight 3,1 kg
- Mechanical life 0,1 x 10⁶
- Switching frequency 0,25 Hz
- Connection Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
- Reaction time max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
- Degree of protection IP54
- Ambient temperature -20 ... 55 °C
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 109825 on MQ Automation is $2,998.65. Order now.
About the product
Guard locking with guard lock monitoring;Emergency stop according to ISO 13850, illuminated;2 illuminated pushbuttons;including adhesive labels;Push-pull plug;Pre-assembled on mounting plates;Integrated Profinet RT switch;Multicode
Manufacturer warranty
109825 Euchner
$2,998.65
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$2,998.65
$2,998.65 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 109825 with other products
Weight
Series
Product Class
Mission time
Safety Integrity Level
B10D
Diagnostic Coverage (DC)
PFHD
Performance Level
Category
Product version number
Switching element
Special features
Version
Assignment diagram
Bus data protocol
Safety data protocol
Assured release distance ...
Fusing
Auxiliary voltage DC
Operating voltage DC
Transponder coding
Degree of contamination (...
Safety class
Locking force FZh
Connecting cable
Current consumption
EMC protection requiremen...
Rated insulation voltage ...
Maximum feed-in current i...
Rated impulse withstand v...
Guard locking principle
Installation orientation
Housing material
Mechanical life
Switching frequency
Connection
Reaction time
Degree of protection
Ambient temperature
Shock and vibration resis...
For the approval acc. to ...
Operating current
Repeat accuracy R
Detent mechanism
Discrepancy time
Off-state current Ir
Operating voltage
Switching current
Type of output
Turn-on time
Switching load
Output voltage
Connection rating
Utilization category acc....
Overtravel
Test-pulse interval
Extraction force
Test pulses
Actuating force
Approach speed
Ready delay
Additional feature
Risk time according to EN...
Solenoid duty cycle
Solenoid operating voltag...
Extension of risk time ac...
Locking force Fmax
Retention force
Selected product
109825
Euchner
109825 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) ...
Weight7.75364854 lb
SeriesMGB-PN (Profinet)
Product ClassAccessories
Mission time20
Safety Integrity LevelSIL 3 (EN 62061:2005)
B10D0,13 x 10⁶
Diagnostic Coverage (DC)99
PFHD4.07 x 10⁻⁸ (Fixed failure ...
Performance LevelPL e
Category4
Product version numberV3.30.10
Switching element2 pos. driven NC
Special featuresWith adhesive ring
VersionEmergency stop illuminated
Assignment diagramB3
Bus data protocolProfinet (IEC 61158 type 10)
Safety data protocolProfisafe (IEC 61784-3-3)
Assured release distance Sarmax.65 mm
Fusingmin.1 A Slow blow
Auxiliary voltage DC24 V DC -15% ... +10% (Th...
Operating voltage DC24 V DC -15% ... 10% ((Re...
Transponder codingMulticode
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Locking force FZh2000 N
Connecting cableProfinet I/O cable, at least...
Current consumptionmax.500 mA
EMC protection requirementsIn accordance with EN 61000-...
Rated insulation voltage Ui75 V
Maximum feed-in current in the connection blockmax.4000 mA
Rated impulse withstand voltage Uimp0,5 kV
Guard locking principleOpen-circuit current princip...
Installation orientationDoor hinge DIN right
Housing materialReinforced plastic, die-cast...
Mechanical life0,1 x 10⁶
Switching frequency0,25 Hz
ConnectionPush-pull RJ45 (X4 (The doc...
Reaction timemax.550 ms Switch-off time...
Degree of protectionIP54
Ambient temperature-20 ... 55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following applies-
Operating current-
Repeat accuracy R-
Detent mechanism-
Discrepancy time-
Off-state current Ir-
Operating voltage-
Switching current-
Type of output-
Turn-on time-
Switching load-
Output voltage-
Connection rating-
Utilization category acc. to EN 60947-5-2-
Overtravel-
Test-pulse interval-
Extraction force-
Test pulses-
Actuating force-
Approach speed-
Ready delay-
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D0,13 x 10⁶
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
Product version number-
Switching element2 pos. driven NC
Special features-
VersionEmergency stop
Assignment diagram-
Bus data protocol-
Safety data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Locking force FZh-
Connecting cable-
Current consumption40 mA
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
Guard locking principle-
Installation orientationDoor hinge DIN right
Housing materialFiber glass reinforced therm...
Mechanical life1 x 10⁶
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5-pin
Reaction time-
Degree of protectionIP65 (Screwed tight plug co...
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current1 ... 100 mA
Repeat accuracy R10 %
Detent mechanismSnap-in bolt
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage5 ... 24 V
Switching current1 ... 150 mA
Type of output2 semiconductor outputs, p-s...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0 ... 1 V DC
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.100 ms
Extraction force20 N
Test pulsesmax.0,3 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delaymax.1 s
Additional feature-
Risk time according to EN 60947-5-3-
Solenoid duty cycle-
Solenoid operating voltage DC-
Extension of risk time according to EN 60947-5-3 per device-
Locking force Fmax-
Retention force-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
Mission time20 y
Safety Integrity Level-
B10D-
Diagnostic Coverage (DC)-
PFHD4.1 x 10 ⁻⁹
Performance LevelPL e
Category4
Product version number-
Switching element-
Special features-
Version-
Assignment diagram-
Bus data protocol-
Safety data protocol-
Assured release distance Sar-
Fusing0,25 ... 8 A
Auxiliary voltage DC-
Operating voltage DC24 V DC -15% ... 15% Rev...
Transponder coding-
Degree of contamination (external, according to EN 60947-1)3
Safety classIII
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Connecting cable-
Current consumption40 mA
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated insulation voltage Ui50 V
Maximum feed-in current in the connection block-
Rated impulse withstand voltage Uimp0,5 kV
Guard locking principleClosed-circuit current princ...
Installation orientationAny
Housing materialDie-cast zinc
Mechanical life1 x 10⁶
Switching frequencymax.0,5 Hz
Connection2 plug connectors M12, 5 and...
Reaction time-
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
For the approval acc. to UL the following appliesOperation only with UL class...
Operating current-
Repeat accuracy R10 %
Detent mechanism-
Discrepancy timemax.10 ms In acc. with EN ...
Off-state current Irmax.0,25 mA
Operating voltage-
Switching current1 ... 50 mA
Type of outputp-switching, short circuit-p...
Turn-on timemax.400 ms
Switching load24V DC, class 2 (Alternativ...
Output voltage0,8xUB ... UB V DC
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Overtravel5 mm
Test-pulse intervalmin.140 ms
Extraction force20 N
Test pulsesmax.1,0 ms (Applies for a l...
Actuating force10 N
Approach speedmax.20 m/min
Ready delay8 s
Additional featureEscape release actuated by p...
Risk time according to EN 60947-5-3max.260 ms
Solenoid duty cycle100 %
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Locking force Fmax3900 N
Retention force20 N
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 109825?
The price of 109825 on MQ Automation is $2,998.65. Order now.
Out if stock but available for backorder.
109825 Euchner - Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug
Similar products from: Safety Accessories
What can I help you find today?
