109401 Euchner Safety Proximity Sensors
Part#:109401
Alt. Part#:CET3-AR-CRA-AH-50X-SG-109401
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 15, 2025
Product description
109401 Euchner - Non-contact safety switch CET-AR-..., M12
Product Details
- Weight 2.7998674 lb
- Series CET-AR
- Product Class Safety System
- PFHD 3.1 x 10⁻⁹
- Mission time 20 y
- Input voltage 15 ... 27,6 V DC
- Performance Level PL e
- Repeat accuracy R 10 %
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions
- Category 4
- Switching delay from state change max.400 ms
- Turn-on time 400 ms
- Discrepancy time max.10 ms
- Output voltage 0 ... 1 V DC
- Risk time according to EN 60947-5-3 max.400 ms
- Off-state current Ir max.0,25 mA
- Type of output 2 semiconductor outputs, p-switching, short circuit-proof
- Switching current 1 ... 200 mA
- Extension of risk time according to EN 60947-5-3 per device max.5 ms
- Safety class III
- Switching load 24V DC, class 2 (For alternatives see operating instructions)
- Degree of contamination (external, according to EN 60947-1) 3
- Connecting cable 30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
- Fusing 0,5 ... 8 A
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Solenoid duty cycle 100 %
- Connection rating 11 W
- Solenoid operating voltage DC 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Utilization category acc. to EN 60947-5-2 24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
- Current consumption 80 mA
- Approach speed max.20 m/min
- Locking force Fmax 6500 N
- Guard locking principle Closed-circuit current principle
- Connection 2 plug connectors M12, 5 and 8-pin
- Locking force FZh 5000 N (FZH = FMAX/1.3)
- Operating voltage DC 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Switching frequency max.0,5 Hz
- Ready delay 10 s
- Installation orientation Any (Preferably head downward)
- Weight 1 kg
- Mechanical life 1 x 10⁶
- Ambient temperature -20 ... 55 °C
- Shock and vibration resistance In acc. with EN 60947-5-3
- Housing material Stainless steel
- Degree of freedom Y ±5 mm
- Degree of freedom Z ±4 mm
- Degree of protection IP67 (Screwed tight plug connector/mating component)
- Degree of freedom X ±5 mm
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 109401 on MQ Automation is $953.54. Order now.
About the product
Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;Door monitoring output;Indication of the door position by LED;Teach-in input;Approach direction A (delivery state)
This item can ship in 3-5 days!
Manufacturer warranty
109401 Euchner
$953.54
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$953.54
$953.54 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 109401 with other products
Weight
Series
Product Class
PFHD
Mission time
Input voltage
Performance Level
Repeat accuracy R
For the approval acc. to ...
Category
Switching delay from stat...
Turn-on time
Discrepancy time
Output voltage
Risk time according to EN...
Off-state current Ir
Type of output
Switching current
Extension of risk time ac...
Safety class
Switching load
Degree of contamination (...
Connecting cable
Fusing
EMC protection requiremen...
Solenoid duty cycle
Connection rating
Solenoid operating voltag...
Utilization category acc....
Current consumption
Approach speed
Locking force Fmax
Guard locking principle
Connection
Locking force FZh
Operating voltage DC
Switching frequency
Ready delay
Installation orientation
Mechanical life
Ambient temperature
Shock and vibration resis...
Housing material
Degree of freedom Y
Degree of freedom Z
Degree of protection
Degree of freedom X
Additional feature
Rated impulse withstand v...
Rated insulation voltage ...
Test pulses
Test-pulse interval
Actuating force
Extraction force
Overtravel
Retention force
B10D
Version
Operating current
Switching element
Detent mechanism
Operating voltage
Selected product
Weight2.7998674 lb
SeriesCET-AR
Product ClassSafety System
PFHD3.1 x 10⁻⁹
Mission time20 y
Input voltage15 ... 27,6 V DC
Performance LevelPL e
Repeat accuracy R10 %
For the approval acc. to UL the following appliesOperation only with UL class...
Category4
Switching delay from state changemax.400 ms
Turn-on time400 ms
Discrepancy timemax.10 ms
Output voltage0 ... 1 V DC
Risk time according to EN 60947-5-3max.400 ms
Off-state current Irmax.0,25 mA
Type of output2 semiconductor outputs, p-s...
Switching current1 ... 200 mA
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Safety classIII
Switching load24V DC, class 2 (For altern...
Degree of contamination (external, according to EN 60947-1)3
Connecting cable30V DC, 2A (For UL requirem...
Fusing0,5 ... 8 A
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Solenoid duty cycle100 %
Connection rating11 W
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Current consumption80 mA
Approach speedmax.20 m/min
Locking force Fmax6500 N
Guard locking principleClosed-circuit current princ...
Connection2 plug connectors M12, 5 and...
Locking force FZh5000 N (FZH = FMAX/1.3)
Operating voltage DC24 V DC -15% ... 15% Rev...
Switching frequencymax.0,5 Hz
Ready delay10 s
Installation orientationAny (Preferably head downwa...
Mechanical life1 x 10⁶
Ambient temperature-20 ... 55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialStainless steel
Degree of freedom Y±5 mm
Degree of freedom Z±4 mm
Degree of protectionIP67 (Screwed tight plug co...
Degree of freedom X±5 mm
Additional feature-
Rated impulse withstand voltage Uimp-
Rated insulation voltage Ui-
Test pulses-
Test-pulse interval-
Actuating force-
Extraction force-
Overtravel-
Retention force-
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
PFHD4.1 x 10 ⁻⁹
Mission time20 y
Input voltage-
Performance LevelPL e
Repeat accuracy R10 %
For the approval acc. to UL the following appliesOperation only with UL class...
Category4
Switching delay from state change-
Turn-on timemax.400 ms
Discrepancy timemax.10 ms In acc. with EN ...
Output voltage0,8xUB ... UB V DC
Risk time according to EN 60947-5-3max.260 ms
Off-state current Irmax.0,25 mA
Type of outputp-switching, short circuit-p...
Switching current1 ... 50 mA
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Safety classIII
Switching load24V DC, class 2 (Alternativ...
Degree of contamination (external, according to EN 60947-1)3
Connecting cable-
Fusing0,25 ... 8 A
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Solenoid duty cycle100 %
Connection rating6 W
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Current consumption40 mA
Approach speedmax.20 m/min
Locking force Fmax3900 N
Guard locking principleClosed-circuit current princ...
Connection2 plug connectors M12, 5 and...
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Operating voltage DC24 V DC -15% ... 15% Rev...
Switching frequencymax.0,5 Hz
Ready delay8 s
Installation orientationAny
Mechanical life1 x 10⁶
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialDie-cast zinc
Degree of freedom Y-
Degree of freedom Z-
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Degree of freedom X-
Additional featureEscape release actuated by p...
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.1,0 ms (Applies for a l...
Test-pulse intervalmin.140 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force20 N
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
PFHD4.1 x 10 ⁻⁹
Mission time20 y
Input voltage-
Performance LevelPL e
Repeat accuracy R10 %
For the approval acc. to UL the following appliesOperation only with UL class...
Category4
Switching delay from state change-
Turn-on timemax.400 ms
Discrepancy timemax.10 ms In acc. with EN ...
Output voltage0 ... 1 V DC
Risk time according to EN 60947-5-3-
Off-state current Irmax.0,25 mA
Type of output2 semiconductor outputs, p-s...
Switching current1 ... 150 mA
Extension of risk time according to EN 60947-5-3 per device-
Safety classIII
Switching load24V DC, class 2 (Alternativ...
Degree of contamination (external, according to EN 60947-1)3
Connecting cable-
Fusing0,25 ... 8 A
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Solenoid duty cycle-
Connection rating1 W
Solenoid operating voltage DC-
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Current consumption40 mA
Approach speedmax.20 m/min
Locking force Fmax-
Guard locking principle-
Connection2 plug connectors M12, 5-pin
Locking force FZh-
Operating voltage DC24 V DC -15% ... 15% Rev...
Switching frequencymax.0,5 Hz
Ready delaymax.1 s
Installation orientationDoor hinge DIN right
Mechanical life1 x 10⁶
Ambient temperature-20 ... +55 °C
Shock and vibration resistanceIn acc. with EN 60947-5-3
Housing materialFiber glass reinforced therm...
Degree of freedom Y-
Degree of freedom Z-
Degree of protectionIP65 (Screwed tight plug co...
Degree of freedom X-
Additional feature-
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.0,3 ms (Applies for a l...
Test-pulse intervalmin.100 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force-
B10D0,13 x 10⁶
VersionEmergency stop
Operating current1 ... 100 mA
Switching element2 pos. driven NC
Detent mechanismSnap-in bolt
Operating voltage5 ... 24 V
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 109401?
The price of 109401 on MQ Automation is $953.54. Order now.
Out if stock but available for backorder.
109401 Euchner - Non-contact safety switch CET-AR-..., M12
Similar products from: Safety Proximity Sensors
What can I help you find today?
