109231 Euchner Safety Proximity Sensors

109231 on MQ Automation
Euchner
  • 109231
  • 109231
  • 109231

Part#:109231

Alt. Part#:CET1-AR-CDA-CH-50X-SG-109231

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

109231 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

Product Details

  • Weight
    2.65436248 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • Performance Level
    Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
  • PFHD
    Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
  • Mission time
    20 y
  • Category
    Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Discrepancy time
    max.10 ms
  • Risk time according to EN 60947-5-3
    max.400 ms
  • Turn-on time
    400 ms
  • Output current
    1 ... 50 mA
  • Repeat accuracy R
    10 %
  • Off-state current Ir
    max.0,25 mA
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Solenoid duty cycle
    100 %
  • Type of output
    Semiconductor output, p-switching, short circuit-proof
  • Output voltage
    0,8xUB ... UB V DC
  • Safety class
    III
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Degree of contamination (external, according to EN 60947-1)
    3
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Fusing
    0,5 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Locking force FZh
    5000 N
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Current consumption
    80 mA
  • Switching frequency
    max.0,5 Hz
  • Guard locking principle
    Closed-circuit current principle
  • Locking force Fmax
    6500 N
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Ready delay
    10 s
  • Approach speed
    max.20 m/min
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Degree of freedom Y
    ±5 mm
  • Weight
    1 kg
  • Degree of freedom X
    ±5 mm
  • Ambient temperature
    -20 ... 55 °C
  • Installation orientation
    Any (Preferably head downward)
  • Degree of freedom Z
    ±4 mm
  • Mechanical life
    1 x 10⁶
  • Housing material
    Stainless steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 109231 on MQ Automation is $831.94. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;With double ramp;Approach directions A and C (delivery state)


Manufacturer warranty

109231 Euchner

$831.94

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$831.94

$831.94 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 109231 with other products

Weight

Series

Product Class

Performance Level

PFHD

Mission time

Category

For the approval acc. to ...

Discrepancy time

Risk time according to EN...

Turn-on time

Output current

Repeat accuracy R

Off-state current Ir

Extension of risk time ac...

Solenoid duty cycle

Type of output

Output voltage

Safety class

Switching load

Degree of contamination (...

EMC protection requiremen...

Connection rating

Fusing

Solenoid operating voltag...

Locking force FZh

Utilization category acc....

Operating voltage DC

Current consumption

Switching frequency

Guard locking principle

Locking force Fmax

Connection

Ready delay

Approach speed

Degree of protection

Degree of freedom Y

Degree of freedom X

Ambient temperature

Installation orientation

Degree of freedom Z

Mechanical life

Housing material

Additional feature

Switching current

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

Shock and vibration resis...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

109231
0 in stock
109231
Euchner

109231 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

Weight2.65436248 lb

SeriesCET-AR

Product ClassSafety System

Performance LevelDepending on external contro...

PFHDDepending on external contro...

Mission time20 y

CategoryDepending on external contro...

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms

Risk time according to EN 60947-5-3max.400 ms

Turn-on time400 ms

Output current1 ... 50 mA

Repeat accuracy R10 %

Off-state current Irmax.0,25 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Solenoid duty cycle100 %

Type of outputSemiconductor output, p-swit...

Output voltage0,8xUB ... UB V DC

Safety classIII

Switching load24V DC, class 2 (For altern...

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Fusing0,5 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Locking force FZh5000 N

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption80 mA

Switching frequencymax.0,5 Hz

Guard locking principleClosed-circuit current princ...

Locking force Fmax6500 N

Connection2 plug connectors M12, 5 and...

Ready delay10 s

Approach speedmax.20 m/min

Degree of protectionIP67 (Screwed tight plug co...

Degree of freedom Y±5 mm

Degree of freedom X±5 mm

Ambient temperature-20 ... 55 °C

Installation orientationAny (Preferably head downwa...

Degree of freedom Z±4 mm

Mechanical life1 x 10⁶

Housing materialStainless steel

Additional feature-

Switching current-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

Shock and vibration resistance-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Risk time according to EN 60947-5-3max.260 ms

Turn-on timemax.400 ms

Output current-

Repeat accuracy R10 %

Off-state current Irmax.0,25 mA

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Solenoid duty cycle100 %

Type of outputp-switching, short circuit-p...

Output voltage0,8xUB ... UB V DC

Safety classIII

Switching load24V DC, class 2 (Alternativ...

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption40 mA

Switching frequencymax.0,5 Hz

Guard locking principleClosed-circuit current princ...

Locking force Fmax3900 N

Connection2 plug connectors M12, 5 and...

Ready delay8 s

Approach speedmax.20 m/min

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Degree of freedom Y-

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Installation orientationAny

Degree of freedom Z-

Mechanical life1 x 10⁶

Housing materialDie-cast zinc

Additional featureEscape release actuated by p...

Switching current1 ... 50 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

Performance LevelPL e

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Discrepancy timemax.10 ms In acc. with EN ...

Risk time according to EN 60947-5-3-

Turn-on timemax.400 ms

Output current-

Repeat accuracy R10 %

Off-state current Irmax.0,25 mA

Extension of risk time according to EN 60947-5-3 per device-

Solenoid duty cycle-

Type of output2 semiconductor outputs, p-s...

Output voltage0 ... 1 V DC

Safety classIII

Switching load24V DC, class 2 (Alternativ...

Degree of contamination (external, according to EN 60947-1)3

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Locking force FZh-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Operating voltage DC24 V DC -15% ... 15% Rev...

Current consumption40 mA

Switching frequencymax.0,5 Hz

Guard locking principle-

Locking force Fmax-

Connection2 plug connectors M12, 5-pin

Ready delaymax.1 s

Approach speedmax.20 m/min

Degree of protectionIP65 (Screwed tight plug co...

Degree of freedom Y-

Degree of freedom X-

Ambient temperature-20 ... +55 °C

Installation orientationDoor hinge DIN right

Degree of freedom Z-

Mechanical life1 x 10⁶

Housing materialFiber glass reinforced therm...

Additional feature-

Switching current1 ... 150 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

FAQ

What is the price of 109231?
The price of 109231 on MQ Automation is $831.94. Order now.

Out if stock but available for backorder.

109231 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

What can I help you find today?

Recommended parts