109015 Euchner Safety Proximity Sensors
Part#:109015
Alt. Part#:CET1-AR-CRA-CH-50X-SG-C2290-109015
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
109015 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)
Product Details
- Weight 3.9132005 lb
- Series CET-AR
- Product Class Safety System
- PFHD Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
- Mission time 20 y
- Performance Level Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
- Category Depending on external control of guard locking (LEDs have the same ground potential as the guard locking solenoid.)
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions
- Repeat accuracy R 10 %
- Turn-on time 400 ms
- Off-state current Ir max.0,25 mA
- Risk time according to EN 60947-5-3 max.400 ms
- Output voltage UB-1,5V ... UB V DC (Values at a switching current of 50mA without taking into account the cable lengths)
- Discrepancy time max.10 ms
- Output current 1 ... 200 mA
- Type of output Semiconductor outputs, p-switching, short circuit-proof
- Switching load 24V DC, class 2 (For alternatives see operating instructions)
- Extension of risk time according to EN 60947-5-3 per device max.5 ms
- Safety class III
- Solenoid duty cycle 100 %
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Fusing 0,25 ... 8 A
- Degree of contamination (external, according to EN 60947-1) 3
- Solenoid operating voltage DC 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
- Connection rating 11 W
- Utilization category acc. to EN 60947-5-2 24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
- Current consumption 450 mA
- Operating voltage DC 24 V DC -15% ... 10%
- Switching frequency max.0,5 Hz
- Locking force FZh 5000 N
- Guard locking principle Closed-circuit current principle
- Approach speed max.20 m/min
- Ready delay 10 s
- Locking force Fmax 6500 N
- Connection 2 plug connectors M12, 5 and 8-pin
- Degree of freedom Y ±5 mm
- Degree of freedom X ±5 mm
- Degree of freedom Z ±4 mm
- Housing material Stainless steel
- Installation orientation Any (Preferably head downward)
- Degree of protection IP67 (Screwed tight plug connector/mating component)
- Weight 1 kg
- Ambient temperature -20 ... 55 °C
- Mechanical life 1 x 10⁶
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 109015 on MQ Automation is $933.41. Order now.
About the product
Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Multicode;Wire front release (bowden), 3 m, automatic return;Approach direction A (delivery state)
Manufacturer warranty
109015 Euchner
$933.41
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$933.41
$933.41 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 109015 with other products
Weight
Series
Product Class
PFHD
Mission time
Performance Level
Category
For the approval acc. to ...
Repeat accuracy R
Turn-on time
Off-state current Ir
Risk time according to EN...
Output voltage
Discrepancy time
Output current
Type of output
Switching load
Extension of risk time ac...
Safety class
Solenoid duty cycle
EMC protection requiremen...
Fusing
Degree of contamination (...
Solenoid operating voltag...
Connection rating
Utilization category acc....
Current consumption
Operating voltage DC
Switching frequency
Locking force FZh
Guard locking principle
Approach speed
Ready delay
Locking force Fmax
Connection
Degree of freedom Y
Degree of freedom X
Degree of freedom Z
Housing material
Installation orientation
Degree of protection
Ambient temperature
Mechanical life
Additional feature
Switching current
Rated impulse withstand v...
Rated insulation voltage ...
Test pulses
Test-pulse interval
Actuating force
Extraction force
Overtravel
Retention force
Shock and vibration resis...
B10D
Version
Operating current
Switching element
Detent mechanism
Operating voltage
Selected product
109015
Euchner
109015 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)
Weight3.9132005 lb
SeriesCET-AR
Product ClassSafety System
PFHDDepending on external contro...
Mission time20 y
Performance LevelDepending on external contro...
CategoryDepending on external contro...
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R10 %
Turn-on time400 ms
Off-state current Irmax.0,25 mA
Risk time according to EN 60947-5-3max.400 ms
Output voltageUB-1,5V ... UB V DC (Values...
Discrepancy timemax.10 ms
Output current1 ... 200 mA
Type of outputSemiconductor outputs, p-swi...
Switching load24V DC, class 2 (For altern...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Safety classIII
Solenoid duty cycle100 %
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Degree of contamination (external, according to EN 60947-1)3
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Connection rating11 W
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Current consumption450 mA
Operating voltage DC24 V DC -15% ... 10%
Switching frequencymax.0,5 Hz
Locking force FZh5000 N
Guard locking principleClosed-circuit current princ...
Approach speedmax.20 m/min
Ready delay10 s
Locking force Fmax6500 N
Connection2 plug connectors M12, 5 and...
Degree of freedom Y±5 mm
Degree of freedom X±5 mm
Degree of freedom Z±4 mm
Housing materialStainless steel
Installation orientationAny (Preferably head downwa...
Degree of protectionIP67 (Screwed tight plug co...
Ambient temperature-20 ... 55 °C
Mechanical life1 x 10⁶
Additional feature-
Switching current-
Rated impulse withstand voltage Uimp-
Rated insulation voltage Ui-
Test pulses-
Test-pulse interval-
Actuating force-
Extraction force-
Overtravel-
Retention force-
Shock and vibration resistance-
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
122813
Euchner
122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release
Weight1.763696 lb
SeriesCTP-AR
Product ClassSafety System
PFHD4.1 x 10 ⁻⁹
Mission time20 y
Performance LevelPL e
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R10 %
Turn-on timemax.400 ms
Off-state current Irmax.0,25 mA
Risk time according to EN 60947-5-3max.260 ms
Output voltage0,8xUB ... UB V DC
Discrepancy timemax.10 ms In acc. with EN ...
Output current-
Type of outputp-switching, short circuit-p...
Switching load24V DC, class 2 (Alternativ...
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Safety classIII
Solenoid duty cycle100 %
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Degree of contamination (external, according to EN 60947-1)3
Solenoid operating voltage DC24 V DC -15% ... +10% Re...
Connection rating6 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Current consumption40 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Switching frequencymax.0,5 Hz
Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...
Guard locking principleClosed-circuit current princ...
Approach speedmax.20 m/min
Ready delay8 s
Locking force Fmax3900 N
Connection2 plug connectors M12, 5 and...
Degree of freedom Y-
Degree of freedom X-
Degree of freedom Z-
Housing materialDie-cast zinc
Installation orientationAny
Degree of protectionIP67/IP69/IP69K (Screwed ti...
Ambient temperature-20 ... +55 °C
Mechanical life1 x 10⁶
Additional featureEscape release actuated by p...
Switching current1 ... 50 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.1,0 ms (Applies for a l...
Test-pulse intervalmin.140 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force20 N
Shock and vibration resistanceIn acc. with EN 60947-5-3
B10D-
Version-
Operating current-
Switching element-
Detent mechanism-
Operating voltage-
Weight3.968316 lb
SeriesMGBS-P-I-AP
Product ClassSafety System
PFHD4.1 x 10 ⁻⁹
Mission time20 y
Performance LevelPL e
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R10 %
Turn-on timemax.400 ms
Off-state current Irmax.0,25 mA
Risk time according to EN 60947-5-3-
Output voltage0 ... 1 V DC
Discrepancy timemax.10 ms In acc. with EN ...
Output current-
Type of output2 semiconductor outputs, p-s...
Switching load24V DC, class 2 (Alternativ...
Extension of risk time according to EN 60947-5-3 per device-
Safety classIII
Solenoid duty cycle-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Fusing0,25 ... 8 A
Degree of contamination (external, according to EN 60947-1)3
Solenoid operating voltage DC-
Connection rating1 W
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Current consumption40 mA
Operating voltage DC24 V DC -15% ... 15% Rev...
Switching frequencymax.0,5 Hz
Locking force FZh-
Guard locking principle-
Approach speedmax.20 m/min
Ready delaymax.1 s
Locking force Fmax-
Connection2 plug connectors M12, 5-pin
Degree of freedom Y-
Degree of freedom X-
Degree of freedom Z-
Housing materialFiber glass reinforced therm...
Installation orientationDoor hinge DIN right
Degree of protectionIP65 (Screwed tight plug co...
Ambient temperature-20 ... +55 °C
Mechanical life1 x 10⁶
Additional feature-
Switching current1 ... 150 mA
Rated impulse withstand voltage Uimp0,5 kV
Rated insulation voltage Ui50 V
Test pulsesmax.0,3 ms (Applies for a l...
Test-pulse intervalmin.100 ms
Actuating force10 N
Extraction force20 N
Overtravel5 mm
Retention force-
Shock and vibration resistanceIn acc. with EN 60947-5-3
B10D0,13 x 10⁶
VersionEmergency stop
Operating current1 ... 100 mA
Switching element2 pos. driven NC
Detent mechanismSnap-in bolt
Operating voltage5 ... 24 V
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 109015?
The price of 109015 on MQ Automation is $933.41. Order now.
Out if stock but available for backorder.
109015 Euchner - Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)
Similar products from: Safety Proximity Sensors
What can I help you find today?
