106798 Euchner Safety Proximity Sensors
Part#:106798
Alt. Part#:CES-AP-C01-CH-SB-106798
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Mar 16, 2025
Product description
106798 Euchner - Non-contact safety switch CES-AP-C01-...
Product Details
- Weight 0.42108242 lb
- Series CES-AP
- Product Class Safety System
- Switching hysteresis min.1 mm (The values apply for surface installation)
- Assured operating distance Sao min.15 mm (The values apply for surface installation)
- Operating distance 18 mm
- Assured release distance Sar max.45 mm (The values apply for surface installation)
- Mission time 20
- PFHD 2.1 x 10⁻⁹ (Applying the limit value from EN ISO 13849-1:2008, section 4.5.2 (MTTFd = max. 100 years), BG certifies a PFHd of max. 2.47x10-8.)
- Performance Level PL e
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Off-state current Ir max.0,25 mA
- Utilization category acc. to EN 60947-5-2 24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Rated conditional short-circuit current max.100 A
- Switching current 1 ... 400 mA
- Repeat accuracy R ≤10
- Category 4
- Discrepancy time max.10 ms
- Output voltage UB-1,5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
- Type of output Semiconductor outputs, p-switching, short circuit-proof
- Safety class III
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Test pulses max.0,4 ms
- Risk time according to EN 60947-5-3 max.260 ms
- Rated impulse withstand voltage Uimp 1,5 kV
- Turn-on time max.400 ms
- Degree of contamination (external, according to EN 60947-1) 3
- Fusing 0,25 ... 8 A
- Rated insulation voltage Ui 300 V (Tested by employers' liability insurance association up to 75V.)
- Current consumption max.50 mA
- Switching frequency max.1 Hz
- Operating voltage DC 24 V DC 15% ... 15% Reverse polarity protected, regulated, residual ripple < 5 %, PELV
- Connection M12 plug connector, 5-pin
- Ready delay 0,5 s
- Tightening torque max.1 Nm
- Ambient temperature -20 ... 55 °C
- Degree of protection IP67
- Mounting distance min.40 mm
- Installation orientation Any
- Weight 0,12 kg
- Housing material Plastic, PBT
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 106798 on MQ Automation is $237.87. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;M12 plug connector 5-pin;Multicode
This item can ship in 3-5 days!
Manufacturer warranty
106798 Euchner
$237.87
Your price can be lower.
Log in or Create account to check your discount
Stock:
Select Qty:
$237.87
$237.87 each
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 106798 with other products
Weight
Series
Product Class
Switching hysteresis
Assured operating distanc...
Operating distance
Assured release distance ...
Mission time
PFHD
Performance Level
For the approval acc. to ...
Off-state current Ir
Utilization category acc....
Rated conditional short-c...
Switching current
Repeat accuracy R
Category
Discrepancy time
Output voltage
Type of output
Safety class
EMC protection requiremen...
Test pulses
Risk time according to EN...
Rated impulse withstand v...
Turn-on time
Degree of contamination (...
Fusing
Rated insulation voltage ...
Current consumption
Switching frequency
Operating voltage DC
Connection
Ready delay
Tightening torque
Ambient temperature
Degree of protection
Mounting distance
Installation orientation
Housing material
Shock and vibration resis...
Test-pulse interval
Extension of risk time ac...
Cable ambient temperature...
Mounting method
Static bending radius
Cable ambient temperature...
Dynamic bending radius
Selected product
Weight0.42108242 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm (The values apply ...
Assured operating distance Saomin.15 mm (The values apply...
Operating distance18 mm
Assured release distance Sarmax.45 mm (The values apply...
Mission time20
PFHD2.1 x 10⁻⁹ (Applying the li...
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Off-state current Irmax.0,25 mA
Utilization category acc. to EN 60947-5-224V 400mA (Caution: outputs...
Rated conditional short-circuit currentmax.100 A
Switching current1 ... 400 mA
Repeat accuracy R≤10
Category4
Discrepancy timemax.10 ms
Output voltageUB-1,5 ... UB V DC (Values ...
Type of outputSemiconductor outputs, p-swi...
Safety classIII
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Test pulsesmax.0,4 ms
Risk time according to EN 60947-5-3max.260 ms
Rated impulse withstand voltage Uimp1,5 kV
Turn-on timemax.400 ms
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Rated insulation voltage Ui300 V (Tested by employers...
Current consumptionmax.50 mA
Switching frequencymax.1 Hz
Operating voltage DC24 V DC 15% ... 15% Reve...
ConnectionM12 plug connector, 5-pin
Ready delay0,5 s
Tightening torquemax.1 Nm
Ambient temperature-20 ... 55 °C
Degree of protectionIP67
Mounting distancemin.40 mm
Installation orientationAny
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
Test-pulse interval-
Extension of risk time according to EN 60947-5-3 per device-
Cable ambient temperature (dynamic)-
Mounting method-
Static bending radius-
Cable ambient temperature (static)-
Dynamic bending radius-
105748
Euchner
105748 Euchner - Non-contact safety switch CES-AR-CL2-... , plug connector M12, PUR
Weight0.29100984 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Operating distance19 mm
Assured release distance Sarmax.60 mm
Mission time20
PFHD1.9 x 10⁻⁹
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Off-state current Irmax.0,25 mA
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Rated conditional short-circuit current100 A
Switching currentmax.50 mA
Repeat accuracy R≤ 10
Category4
Discrepancy timemax.10 ms
Output voltage0,8 x UB ... UB V DC
Type of outputp-switching, short circuit-p...
Safety classIII
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Test pulsesmax.1 ms (Applies for a loa...
Risk time according to EN 60947-5-3max.260 ms
Rated impulse withstand voltage Uimp1,5 kV
Turn-on timemax.400 ms
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Rated insulation voltage Ui75 V
Current consumptionmax.50 mA (Without taking i...
Switching frequencymax.1 Hz
Operating voltage DC24 V DC 15% ... 15% Regu...
ConnectionConnection cable PUR, length...
Ready delay10 s
Tightening torquemax.1 Nm
Ambient temperature-
Degree of protectionIP67
Mounting distancemin.120 mm
Installation orientationAny
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
Test-pulse intervalmin.140 ms
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Cable ambient temperature (dynamic)-25 ... 65 °C
Mounting methodSurface mounting on metal
Static bending radius5 x cable diameter
Cable ambient temperature (static)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Operating distance19 mm
Assured release distance Sarmax.60 mm
Mission time20
PFHD1.8 x 10⁻⁹
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Off-state current Irmax.0,25 mA
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Rated conditional short-circuit current100 A
Switching currentmax.50 mA
Repeat accuracy R≤ 10
Category4
Discrepancy timemax.10 ms
Output voltage0,8 x UB ... UB V DC
Type of outputp-switching, short circuit-p...
Safety classIII
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Test pulsesmax.0,3 ms (Applies for a l...
Risk time according to EN 60947-5-3max.260 ms
Rated impulse withstand voltage Uimp1,5 kV
Turn-on timemax.300 ms
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Rated insulation voltage Ui75 V
Current consumptionmax.30 mA (Without taking i...
Switching frequencymax.1 Hz
Operating voltage DC24 V DC 15% ... 15% Regu...
Connectionconnection cable PVC, length...
Ready delay0,5 s
Tightening torquemax.1 Nm
Ambient temperature-
Degree of protectionIP67, IP69K
Mounting distancemin.400 mm
Installation orientationAny
Housing materialPlastic, PBT
Shock and vibration resistanceIn acc. with EN 60947-5-3
Test-pulse intervalmin.100 ms
Extension of risk time according to EN 60947-5-3 per device-
Cable ambient temperature (dynamic)0 ... 65 °C
Mounting methodSurface mounting on metal
Static bending radius5 x cable diameter
Cable ambient temperature (static)-40 ... 65 °C
Dynamic bending radius10 x cable diameter
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 106798?
The price of 106798 on MQ Automation is $237.87. Order now.
Out if stock but available for backorder.
106798 Euchner - Non-contact safety switch CES-AP-C01-...
Similar products from: Safety Proximity Sensors
What can I help you find today?
