106275 Euchner Safety Proximity Sensors

106275 on MQ Automation
Euchner
  • 106275
  • 106275
  • 106275

Part#:106275

Alt. Part#:CET1-AR-CDA-AH-50X-SG-106275

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

106275 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

Product Details

  • Weight
    2.645544 lb
  • Series
    CET-AR
  • Product Class
    Safety System
  • PFHD
    3.1 x 10⁻⁹
  • Mission time
    20 y
  • Performance Level
    PL e
  • Category
    4
  • Risk time according to EN 60947-5-3
    max.400 ms
  • For the approval acc. to UL the following applies
    Operation only with UL class 2 power supply, or equivalent measures see operating instructions
  • Repeat accuracy R
    10 %
  • Input voltage
    15 ... 27,6 V DC Teach-in input J
  • Discrepancy time
    max.10 ms
  • Off-state current Ir
    max.0,25 mA
  • Turn-on time
    400 ms
  • Extension of risk time according to EN 60947-5-3 per device
    max.5 ms
  • Output current
    1 ... 200 mA
  • Output voltage
    UB-1,5V ... UB V DC (Values at a switching current of 50mA without taking into account the cable lengths)
  • Type of output
    Semiconductor outputs, p-switching, short circuit-proof
  • Switching load
    24V DC, class 2 (For alternatives see operating instructions)
  • Safety class
    III
  • Degree of contamination (external, according to EN 60947-1)
    3
  • Solenoid duty cycle
    100 %
  • EMC protection requirements
    In acc. with EN IEC 60947-5-3
  • Connection rating
    11 W
  • Fusing
    0,25 ... 8 A
  • Solenoid operating voltage DC
    24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Utilization category acc. to EN 60947-5-2
    24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
  • Current consumption
    80 mA
  • Operating voltage DC
    24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
  • Locking force FZh
    5000 N
  • Guard locking principle
    Closed-circuit current principle
  • Locking force Fmax
    6500 N
  • Approach speed
    max.20 m/min
  • Connection
    2 plug connectors M12, 5 and 8-pin
  • Switching frequency
    max.0,5 Hz
  • Ready delay
    10 s
  • Degree of freedom X
    ±5 mm
  • Degree of protection
    IP67 (Screwed tight plug connector/mating component)
  • Mechanical life
    1 x 10⁶
  • Degree of freedom Z
    ±4 mm
  • Housing material
    Die-cast aluminum
  • Degree of freedom Y
    ±5 mm
  • Ambient temperature
    -20 ... 55 °C
  • Weight
    1 kg
  • Installation orientation
    Any (Preferably head downward)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 106275 on MQ Automation is $913.07. Order now.


About the product

Safety switch with guard locking and integrated evaluation electronics;Locking force up to 6500 N;Up to 20 switches in series;Short circuit monitoring;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;With 2 plug connectors M12;Unicode;Teach-in input;With double ramp;Approach directions A and C (delivery state)


Manufacturer warranty

106275 Euchner

$913.07

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$913.07

$913.07 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 106275 with other products

Weight

Series

Product Class

PFHD

Mission time

Performance Level

Category

Risk time according to EN...

For the approval acc. to ...

Repeat accuracy R

Input voltage

Discrepancy time

Off-state current Ir

Turn-on time

Extension of risk time ac...

Output current

Output voltage

Type of output

Switching load

Safety class

Degree of contamination (...

Solenoid duty cycle

EMC protection requiremen...

Connection rating

Fusing

Solenoid operating voltag...

Utilization category acc....

Current consumption

Operating voltage DC

Locking force FZh

Guard locking principle

Locking force Fmax

Approach speed

Connection

Switching frequency

Ready delay

Degree of freedom X

Degree of protection

Mechanical life

Degree of freedom Z

Housing material

Degree of freedom Y

Ambient temperature

Installation orientation

Additional feature

Switching current

Rated impulse withstand v...

Rated insulation voltage ...

Test pulses

Test-pulse interval

Actuating force

Extraction force

Overtravel

Retention force

Shock and vibration resis...

B10D

Version

Operating current

Switching element

Detent mechanism

Operating voltage

Selected product

106275
0 in stock
106275
Euchner

106275 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

Weight2.645544 lb

SeriesCET-AR

Product ClassSafety System

PFHD3.1 x 10⁻⁹

Mission time20 y

Performance LevelPL e

Category4

Risk time according to EN 60947-5-3max.400 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Input voltage15 ... 27,6 V DC Teach-in ...

Discrepancy timemax.10 ms

Off-state current Irmax.0,25 mA

Turn-on time400 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Output current1 ... 200 mA

Output voltageUB-1,5V ... UB V DC (Values...

Type of outputSemiconductor outputs, p-swi...

Switching load24V DC, class 2 (For altern...

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating11 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Current consumption80 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh5000 N

Guard locking principleClosed-circuit current princ...

Locking force Fmax6500 N

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay10 s

Degree of freedom X±5 mm

Degree of protectionIP67 (Screwed tight plug co...

Mechanical life1 x 10⁶

Degree of freedom Z±4 mm

Housing materialDie-cast aluminum

Degree of freedom Y±5 mm

Ambient temperature-20 ... 55 °C

Installation orientationAny (Preferably head downwa...

Additional feature-

Switching current-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Test pulses-

Test-pulse interval-

Actuating force-

Extraction force-

Overtravel-

Retention force-

Shock and vibration resistance-

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

122813
12 in stock
122813
Euchner

122813 Euchner - Transponder-coded safety switch CTP-AR, 2 x M12, with escape release

Weight1.763696 lb

SeriesCTP-AR

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Category4

Risk time according to EN 60947-5-3max.260 ms

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Input voltage-

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Turn-on timemax.400 ms

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Output current-

Output voltage0,8xUB ... UB V DC

Type of outputp-switching, short circuit-p...

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle100 %

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating6 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC24 V DC -15% ... +10% Re...

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh3000 N (Fzh = Fmax/1.3 Dep...

Guard locking principleClosed-circuit current princ...

Locking force Fmax3900 N

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5 and...

Switching frequencymax.0,5 Hz

Ready delay8 s

Degree of freedom X-

Degree of protectionIP67/IP69/IP69K (Screwed ti...

Mechanical life1 x 10⁶

Degree of freedom Z-

Housing materialDie-cast zinc

Degree of freedom Y-

Ambient temperature-20 ... +55 °C

Installation orientationAny

Additional featureEscape release actuated by p...

Switching current1 ... 50 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force20 N

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D-

Version-

Operating current-

Switching element-

Detent mechanism-

Operating voltage-

162926
1 in stock
162926
Euchner

162926 Euchner - MGBS-P-I-AP, emergency stop, 2 x M12

Weight3.968316 lb

SeriesMGBS-P-I-AP

Product ClassSafety System

PFHD4.1 x 10 ⁻⁹

Mission time20 y

Performance LevelPL e

Category4

Risk time according to EN 60947-5-3-

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R10 %

Input voltage-

Discrepancy timemax.10 ms In acc. with EN ...

Off-state current Irmax.0,25 mA

Turn-on timemax.400 ms

Extension of risk time according to EN 60947-5-3 per device-

Output current-

Output voltage0 ... 1 V DC

Type of output2 semiconductor outputs, p-s...

Switching load24V DC, class 2 (Alternativ...

Safety classIII

Degree of contamination (external, according to EN 60947-1)3

Solenoid duty cycle-

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Connection rating1 W

Fusing0,25 ... 8 A

Solenoid operating voltage DC-

Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...

Current consumption40 mA

Operating voltage DC24 V DC -15% ... 15% Rev...

Locking force FZh-

Guard locking principle-

Locking force Fmax-

Approach speedmax.20 m/min

Connection2 plug connectors M12, 5-pin

Switching frequencymax.0,5 Hz

Ready delaymax.1 s

Degree of freedom X-

Degree of protectionIP65 (Screwed tight plug co...

Mechanical life1 x 10⁶

Degree of freedom Z-

Housing materialFiber glass reinforced therm...

Degree of freedom Y-

Ambient temperature-20 ... +55 °C

Installation orientationDoor hinge DIN right

Additional feature-

Switching current1 ... 150 mA

Rated impulse withstand voltage Uimp0,5 kV

Rated insulation voltage Ui50 V

Test pulsesmax.0,3 ms (Applies for a l...

Test-pulse intervalmin.100 ms

Actuating force10 N

Extraction force20 N

Overtravel5 mm

Retention force-

Shock and vibration resistanceIn acc. with EN 60947-5-3

B10D0,13 x 10⁶

VersionEmergency stop

Operating current1 ... 100 mA

Switching element2 pos. driven NC

Detent mechanismSnap-in bolt

Operating voltage5 ... 24 V

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 106275?
The price of 106275 on MQ Automation is $913.07. Order now.

Out if stock but available for backorder.

106275 Euchner - Non-contact safety switch CET-AR-..., M12, with double ramp

What can I help you find today?

Recommended parts