106192 Euchner Electronic Components

Product Details

• Assured release distance Sar
  max.60 mm
• Assured operating distance Sao
  min.10 mm
• Switching hysteresis
  min.1 mm
• Operating distance
  15 mm
• PFHD
  1.8 x 10⁻⁹
• Performance Level
  PL e
• Mission time
  20
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Category
  4
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Test-pulse interval
  min.100 ms
• Off-state current Ir
  max.0,25 mA
• Rated conditional short-circuit current
  100 A
• Output voltage
  0,8 x UB ... UB V DC
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Type of output
  p-switching, short circuit-proof
• Switching current
  max.50 mA
• Risk time according to EN 60947-5-3
  max.260 ms
• Degree of contamination (external, according to EN 60947-1)
  3
Turn-on time
max.300 ms
Safety class
III
Rated insulation voltage Ui
75 V
EMC protection requirements
In acc. with EN IEC 60947-5-3
Rated impulse withstand voltage Uimp
1,5 kV
Fusing
0,25 ... 8 A
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Connection
connection cable PVC, length 10m
Current consumption
max.30 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Switching frequency
max.1 Hz
Ready delay
0,5 s
Installation orientation
Any
Tightening torque
max.1 Nm
Static bending radius
5 x cable diameter
Weight
0,39 kg
Cable ambient temperature (static)
-40 ... 65 °C
Mounting method
Surface mounting on metal
Cable ambient temperature (dynamic)
0 ... 65 °C
Mounting distance
min.400 mm
Degree of protection
IP67, IP69K
Housing material
Plastic, PBT
Dynamic bending radius
10 x cable diameter
Shock and vibration resistance
In acc. with EN 60947-5-3