105295 Euchner Safety Proximity Sensors
Part#:105295
Alt. Part#:CES-AP-CR2-AH-SF-105295
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
105295 Euchner - Non-contact safety switch CES-AP-CR2-... , with latching connection
Product Details
- Weight 0.1763696 lb
- Series CES-AP
- Product Class Safety System
- Switching hysteresis min.1 mm
- Assured release distance Sar max.60 mm
- Assured operating distance Sao min.10 mm
- Operating distance 15 mm
- Mission time 20
- PFHD 1.8 x 10⁻⁹
- Category 4
- Performance Level PL e
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Repeat accuracy R ≤ 10
- Rated conditional short-circuit current 100 A
- Discrepancy time max.10 ms
- Test-pulse interval min.100 ms
- Off-state current Ir max.0,25 mA
- Output voltage 0,8 x UB ... UB V DC
- Type of output p-switching, short circuit-proof
- Switching current max.50 mA
- Risk time according to EN 60947-5-3 max.260 ms
- Test pulses max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Degree of contamination (external, according to EN 60947-1) 3
- Turn-on time max.300 ms
- Fusing 0,25 ... 8 A
- Safety class III
- Rated impulse withstand voltage Uimp 1,5 kV
- Rated insulation voltage Ui 75 V
- Current consumption max.30 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
- Utilization category acc. to EN 60947-5-2 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Weight 0,04 kg
- Connection Plug connector with latching connection, Ø8, 6-pin
- Mounting method Surface mounting on metal
- Degree of protection IP67, IP69K
- Switching frequency max.1 Hz
- Operating voltage DC 24 V DC 15% ... 15% Regulated, residual ripple < 5 %
- Ready delay 0,5 s
- Installation orientation Any
- Mounting distance min.400 mm
- Housing material Plastic, PBT
- Tightening torque max.1 Nm
- Shock and vibration resistance In acc. with EN 60947-5-3
- Ambient temperature -30 ... 65 °C
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 105295 on MQ Automation is $242.50. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Door hinge right;Category 4 / PL e according to EN ISO 13849-1;Plug connector with latching connection, 6-pin;Unicode;Two safety screws M4x14 included
Manufacturer warranty
105295 Euchner
$242.50
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$242.50
$242.50 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 105295 with other products
Weight
Series
Product Class
Switching hysteresis
Assured release distance ...
Assured operating distanc...
Operating distance
Mission time
PFHD
Category
Performance Level
For the approval acc. to ...
Repeat accuracy R
Rated conditional short-c...
Discrepancy time
Test-pulse interval
Off-state current Ir
Output voltage
Type of output
Switching current
Risk time according to EN...
Test pulses
EMC protection requiremen...
Degree of contamination (...
Turn-on time
Fusing
Safety class
Rated impulse withstand v...
Rated insulation voltage ...
Current consumption
Utilization category acc....
Connection
Mounting method
Degree of protection
Switching frequency
Operating voltage DC
Ready delay
Installation orientation
Mounting distance
Housing material
Tightening torque
Shock and vibration resis...
Ambient temperature
Static bending radius
Dynamic bending radius
Cable ambient temperature...
Cable ambient temperature...
Extension of risk time ac...
Selected product
105295
Euchner
105295 Euchner - Non-contact safety switch CES-AP-CR2-... , with latching connection
Weight0.1763696 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured release distance Sarmax.60 mm
Assured operating distance Saomin.10 mm
Operating distance15 mm
Mission time20
PFHD1.8 x 10⁻⁹
Category4
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Rated conditional short-circuit current100 A
Discrepancy timemax.10 ms
Test-pulse intervalmin.100 ms
Off-state current Irmax.0,25 mA
Output voltage0,8 x UB ... UB V DC
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Risk time according to EN 60947-5-3max.260 ms
Test pulsesmax.0,3 ms (Applies for a l...
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Turn-on timemax.300 ms
Fusing0,25 ... 8 A
Safety classIII
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui75 V
Current consumptionmax.30 mA (Without taking i...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
ConnectionPlug connector with latching...
Mounting methodSurface mounting on metal
Degree of protectionIP67, IP69K
Switching frequencymax.1 Hz
Operating voltage DC24 V DC 15% ... 15% Regu...
Ready delay0,5 s
Installation orientationAny
Mounting distancemin.400 mm
Housing materialPlastic, PBT
Tightening torquemax.1 Nm
Shock and vibration resistanceIn acc. with EN 60947-5-3
Ambient temperature-30 ... 65 °C
Static bending radius-
Dynamic bending radius-
Cable ambient temperature (static)-
Cable ambient temperature (dynamic)-
Extension of risk time according to EN 60947-5-3 per device-
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Assured release distance Sarmax.60 mm
Assured operating distance Saomin.14 mm
Operating distance19 mm
Mission time20
PFHD1.8 x 10⁻⁹
Category4
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Rated conditional short-circuit current100 A
Discrepancy timemax.10 ms
Test-pulse intervalmin.100 ms
Off-state current Irmax.0,25 mA
Output voltage0,8 x UB ... UB V DC
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Risk time according to EN 60947-5-3max.260 ms
Test pulsesmax.0,3 ms (Applies for a l...
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Turn-on timemax.300 ms
Fusing0,25 ... 8 A
Safety classIII
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui75 V
Current consumptionmax.30 mA (Without taking i...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Connectionconnection cable PVC, length...
Mounting methodSurface mounting on metal
Degree of protectionIP67, IP69K
Switching frequencymax.1 Hz
Operating voltage DC24 V DC 15% ... 15% Regu...
Ready delay0,5 s
Installation orientationAny
Mounting distancemin.400 mm
Housing materialPlastic, PBT
Tightening torquemax.1 Nm
Shock and vibration resistanceIn acc. with EN 60947-5-3
Ambient temperature-
Static bending radius5 x cable diameter
Dynamic bending radius10 x cable diameter
Cable ambient temperature (static)-40 ... 65 °C
Cable ambient temperature (dynamic)0 ... 65 °C
Extension of risk time according to EN 60947-5-3 per device-
109052
Euchner
109052 Euchner - Non-contact safety switch CES-AR-CR2-..., with flying lead, PUR
Weight1.763696 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured release distance Sarmax.40 mm
Assured operating distance Saomin.10 mm
Operating distance15 mm
Mission time20
PFHD1.9 x 10⁻⁹
Category4
Performance LevelPL e
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
Rated conditional short-circuit current100 A
Discrepancy timemax.10 ms
Test-pulse intervalmin.140 ms
Off-state current Irmax.0,25 mA
Output voltage0,8 x UB ... UB V DC
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Risk time according to EN 60947-5-3max.260 ms
Test pulsesmax.1 ms (Applies for a loa...
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Turn-on timemax.400 ms
Fusing0,25 ... 8 A
Safety classIII
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui75 V
Current consumptionmax.50 mA (Without taking i...
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Connectionconnection cable PUR, length...
Mounting methodSurface mounting on metal
Degree of protectionIP67, IP69K
Switching frequencymax.1 Hz
Operating voltage DC24 V DC 15% ... 15% Regu...
Ready delay10 s
Installation orientationAny
Mounting distancemin.120 mm
Housing materialPlastic, PBT
Tightening torquemax.1 Nm
Shock and vibration resistanceIn acc. with EN 60947-5-3
Ambient temperature-
Static bending radius5 x cable diameter
Dynamic bending radius10 x cable diameter
Cable ambient temperature (static)-30 ... 65 °C
Cable ambient temperature (dynamic)-25 ... 65 °C
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 105295?
The price of 105295 on MQ Automation is $242.50. Order now.
Out if stock but available for backorder.
105295 Euchner - Non-contact safety switch CES-AP-CR2-... , with latching connection
Similar products from: Safety Proximity Sensors
What can I help you find today?
