104509 Euchner Safety Proximity Sensors
Part#:104509
Alt. Part#:CES-AP-CL2-CH-SF-104509
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
104509 Euchner - Non-contact safety switch CES-AP-CL2-... , with latching connection
Product Details
- Weight 0.20723428 lb
- Series CES-AP
- Product Class Safety System
- Switching hysteresis min.1 mm
- Mission time 20
- Assured operating distance Sao min.10 mm
- Operating distance 15 mm
- Assured release distance Sar max.60 mm
- Performance Level PL e
- PFHD 1.8 x 10⁻⁹
- Repeat accuracy R ≤ 10
- Category 4
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Off-state current Ir max.0,25 mA
- Rated conditional short-circuit current 100 A
- Test-pulse interval min.100 ms
- Discrepancy time max.10 ms
- Output voltage 0,8 x UB ... UB V DC
- Test pulses max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
- Type of output p-switching, short circuit-proof
- Switching current max.50 mA
- Risk time according to EN 60947-5-3 max.260 ms
- Safety class III
- Turn-on time max.300 ms
- EMC protection requirements In acc. with EN IEC 60947-5-3
- Degree of contamination (external, according to EN 60947-1) 3
- Fusing 0,25 ... 8 A
- Rated impulse withstand voltage Uimp 1,5 kV
- Operating voltage DC 24 V DC 15% ... 15% Regulated, residual ripple < 5 %
- Rated insulation voltage Ui 75 V
- Current consumption max.30 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
- Ready delay 0,5 s
- Connection Plug connector with latching connection, Ø8, 6-pin
- Utilization category acc. to EN 60947-5-2 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
- Switching frequency max.1 Hz
- Installation orientation Any
- Weight 0,04 kg
- Tightening torque max.1 Nm
- Mounting method Surface mounting on metal
- Housing material Plastic, PBT
- Mounting distance min.400 mm
- Ambient temperature -30 ... 65 °C
- Degree of protection IP67, IP69K
- Shock and vibration resistance In acc. with EN 60947-5-3
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 104509 on MQ Automation is $152.79. Order now.
About the product
Safety switch with integrated evaluation electronics;No series connection;Short circuit monitoring;2 safety outputs (semiconductor outputs);Door hinge left;Category 4 / PL e according to EN ISO 13849-1;Plug connector with latching connection, 6-pin;Multicode;Two safety screws M4x14 included
Manufacturer warranty
104509 Euchner
$152.79
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$152.79
$152.79 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 104509 with other products
Weight
Series
Product Class
Switching hysteresis
Mission time
Assured operating distanc...
Operating distance
Assured release distance ...
Performance Level
PFHD
Repeat accuracy R
Category
For the approval acc. to ...
Off-state current Ir
Rated conditional short-c...
Test-pulse interval
Discrepancy time
Output voltage
Test pulses
Type of output
Switching current
Risk time according to EN...
Safety class
Turn-on time
EMC protection requiremen...
Degree of contamination (...
Fusing
Rated impulse withstand v...
Operating voltage DC
Rated insulation voltage ...
Current consumption
Ready delay
Connection
Utilization category acc....
Switching frequency
Installation orientation
Tightening torque
Mounting method
Housing material
Mounting distance
Ambient temperature
Degree of protection
Shock and vibration resis...
Static bending radius
Dynamic bending radius
Cable ambient temperature...
Cable ambient temperature...
Extension of risk time ac...
Selected product
104509
Euchner
104509 Euchner - Non-contact safety switch CES-AP-CL2-... , with latching connection
Weight0.20723428 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Mission time20
Assured operating distance Saomin.10 mm
Operating distance15 mm
Assured release distance Sarmax.60 mm
Performance LevelPL e
PFHD1.8 x 10⁻⁹
Repeat accuracy R≤ 10
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Test-pulse intervalmin.100 ms
Discrepancy timemax.10 ms
Output voltage0,8 x UB ... UB V DC
Test pulsesmax.0,3 ms (Applies for a l...
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Turn-on timemax.300 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Rated impulse withstand voltage Uimp1,5 kV
Operating voltage DC24 V DC 15% ... 15% Regu...
Rated insulation voltage Ui75 V
Current consumptionmax.30 mA (Without taking i...
Ready delay0,5 s
ConnectionPlug connector with latching...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Switching frequencymax.1 Hz
Installation orientationAny
Tightening torquemax.1 Nm
Mounting methodSurface mounting on metal
Housing materialPlastic, PBT
Mounting distancemin.400 mm
Ambient temperature-30 ... 65 °C
Degree of protectionIP67, IP69K
Shock and vibration resistanceIn acc. with EN 60947-5-3
Static bending radius-
Dynamic bending radius-
Cable ambient temperature (static)-
Cable ambient temperature (dynamic)-
Extension of risk time according to EN 60947-5-3 per device-
Weight0.52029032 lb
SeriesCES-AP
Product ClassSafety System
Switching hysteresismin.1 mm
Mission time20
Assured operating distance Saomin.14 mm
Operating distance19 mm
Assured release distance Sarmax.60 mm
Performance LevelPL e
PFHD1.8 x 10⁻⁹
Repeat accuracy R≤ 10
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Test-pulse intervalmin.100 ms
Discrepancy timemax.10 ms
Output voltage0,8 x UB ... UB V DC
Test pulsesmax.0,3 ms (Applies for a l...
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Turn-on timemax.300 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Rated impulse withstand voltage Uimp1,5 kV
Operating voltage DC24 V DC 15% ... 15% Regu...
Rated insulation voltage Ui75 V
Current consumptionmax.30 mA (Without taking i...
Ready delay0,5 s
Connectionconnection cable PVC, length...
Utilization category acc. to EN 60947-5-224V 150mA (Caution: outputs...
Switching frequencymax.1 Hz
Installation orientationAny
Tightening torquemax.1 Nm
Mounting methodSurface mounting on metal
Housing materialPlastic, PBT
Mounting distancemin.400 mm
Ambient temperature-
Degree of protectionIP67, IP69K
Shock and vibration resistanceIn acc. with EN 60947-5-3
Static bending radius5 x cable diameter
Dynamic bending radius10 x cable diameter
Cable ambient temperature (static)-40 ... 65 °C
Cable ambient temperature (dynamic)0 ... 65 °C
Extension of risk time according to EN 60947-5-3 per device-
109052
Euchner
109052 Euchner - Non-contact safety switch CES-AR-CR2-..., with flying lead, PUR
Weight1.763696 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Mission time20
Assured operating distance Saomin.10 mm
Operating distance15 mm
Assured release distance Sarmax.40 mm
Performance LevelPL e
PFHD1.9 x 10⁻⁹
Repeat accuracy R≤ 10
Category4
For the approval acc. to UL the following appliesOperation only with UL class...
Off-state current Irmax.0,25 mA
Rated conditional short-circuit current100 A
Test-pulse intervalmin.140 ms
Discrepancy timemax.10 ms
Output voltage0,8 x UB ... UB V DC
Test pulsesmax.1 ms (Applies for a loa...
Type of outputp-switching, short circuit-p...
Switching currentmax.50 mA
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Turn-on timemax.400 ms
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Degree of contamination (external, according to EN 60947-1)3
Fusing0,25 ... 8 A
Rated impulse withstand voltage Uimp1,5 kV
Operating voltage DC24 V DC 15% ... 15% Regu...
Rated insulation voltage Ui75 V
Current consumptionmax.50 mA (Without taking i...
Ready delay10 s
Connectionconnection cable PUR, length...
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Switching frequencymax.1 Hz
Installation orientationAny
Tightening torquemax.1 Nm
Mounting methodSurface mounting on metal
Housing materialPlastic, PBT
Mounting distancemin.120 mm
Ambient temperature-
Degree of protectionIP67, IP69K
Shock and vibration resistanceIn acc. with EN 60947-5-3
Static bending radius5 x cable diameter
Dynamic bending radius10 x cable diameter
Cable ambient temperature (static)-30 ... 65 °C
Cable ambient temperature (dynamic)-25 ... 65 °C
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 104509?
The price of 104509 on MQ Automation is $152.79. Order now.
Out if stock but available for backorder.
104509 Euchner - Non-contact safety switch CES-AP-CL2-... , with latching connection
Similar products from: Safety Proximity Sensors
What can I help you find today?
