102275 Euchner Safety Proximity Sensors

102275 on MQ Automation
Euchner
  • 102275
  • 102275
  • 102275

Part#:102275

Alt. Part#:CMS-R-AZC-SC

Manufacturer:Euchner

Category:Safety Proximity Sensors

Product Lifecycle:Active

Product description

102275 Euchner - Read heads, design A, for ESM, M8

Product Details

  • Weight
    0.16755112 lb
  • Series
    CMS read heads
  • Product Class
    Safety System
  • Assured operating distance Sao
    min.9 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
  • Assured release distance Sar
    max.22 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
  • Center offset
    2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
  • B10D
    20 x 10⁶
  • In compliance with
    EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
  • Switching voltage according to UL
    max.24 V AC/DC
  • Switching delay from state change
    26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
  • Switching frequency, electrical
    max.5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
  • Switching current
    max.100 mA
  • Switching characteristics
    Parallel
  • Switching voltage
    24 ... 35 V (DC)
  • Design
    A
  • Ambient temperature
    -20 ... 60 °C
  • Degree of protection
    IP67
  • Housing material
    Fiber glass reinforced PPS
  • Installation orientation
    Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
  • Fusing
    Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
  • Rated conditional short-circuit current
    100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
  • Method of operation
    Magnetic, reed contact
  • Connection
    4-pin M8 plug connector
  • Number of NO contacts
    2 NO contacts with fuse, 100 mA each
  • Tightening torque
    0,4 ... 0,5 Nm
  • Weight
    0,038 kg
  • Mechanical life
    100 x 10⁶

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 102275 on MQ Automation is $86.68. Order now.


About the product

In combination with evaluation units ESM-BA...;Cube-shaped version, 88 x 25 mm;Plug connector M8


Manufacturer warranty

102275 Euchner

$86.68

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$86.68

$86.68 each

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Manufacturer warranty


Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 102275 with other products

Weight

Series

Product Class

Assured operating distanc...

Assured release distance ...

Center offset

B10D

In compliance with

Switching voltage accordi...

Switching delay from stat...

Switching frequency, elec...

Switching current

Switching characteristics

Switching voltage

Design

Ambient temperature

Degree of protection

Housing material

Installation orientation

Fusing

Rated conditional short-c...

Method of operation

Connection

Number of NO contacts

Tightening torque

Mechanical life

Switching hysteresis

PFHD

Operating distance

Mission time

Performance Level

Category

For the approval acc. to ...

Repeat accuracy R

Discrepancy time

Off-state current Ir

Utilization category acc....

Test pulses

Test-pulse interval

Output voltage

Turn-on time

Risk time according to EN...

Type of output

Rated impulse withstand v...

Rated insulation voltage ...

Degree of contamination (...

Safety class

EMC protection requiremen...

Extension of risk time ac...

Current consumption

Mounting distance

Operating voltage DC

Switching frequency

Ready delay

Cable ambient temperature...

Mounting method

Static bending radius

Shock and vibration resis...

Cable ambient temperature...

Dynamic bending radius

Additional feature

Material

Selected product

102275
0 in stock
102275
Euchner

102275 Euchner - Read heads, design A, for ESM, M8

Weight0.16755112 lb

SeriesCMS read heads

Product ClassSafety System

Assured operating distance Saomin.9 mm (Figure only appli...

Assured release distance Sarmax.22 mm (The assured swit...

Center offset2,5 mm (Figure only applies...

B10D20 x 10⁶

In compliance withEN ISO 13849-1: 2015; EN 620...

Switching voltage according to ULmax.24 V AC/DC

Switching delay from state change26 ms (Parameter dependent ...

Switching frequency, electricalmax.5 Hz (Parameter depende...

Switching currentmax.100 mA

Switching characteristicsParallel

Switching voltage24 ... 35 V (DC)

DesignA

Ambient temperature-20 ... 60 °C

Degree of protectionIP67

Housing materialFiber glass reinforced PPS

Installation orientationAny, pay attention to markin...

FusingFuse 10 A gG (Parameter dep...

Rated conditional short-circuit current100 A (Parameter dependent...

Method of operationMagnetic, reed contact

Connection4-pin M8 plug connector

Number of NO contacts2 NO contacts with fuse, 100...

Tightening torque0,4 ... 0,5 Nm

Mechanical life100 x 10⁶

Switching hysteresis-

PFHD-

Operating distance-

Mission time-

Performance Level-

Category-

For the approval acc. to UL the following applies-

Repeat accuracy R-

Discrepancy time-

Off-state current Ir-

Utilization category acc. to EN 60947-5-2-

Test pulses-

Test-pulse interval-

Output voltage-

Turn-on time-

Risk time according to EN 60947-5-3-

Type of output-

Rated impulse withstand voltage Uimp-

Rated insulation voltage Ui-

Degree of contamination (external, according to EN 60947-1)-

Safety class-

EMC protection requirements-

Extension of risk time according to EN 60947-5-3 per device-

Current consumption-

Mounting distance-

Operating voltage DC-

Switching frequency-

Ready delay-

Cable ambient temperature (dynamic)-

Mounting method-

Static bending radius-

Shock and vibration resistance-

Cable ambient temperature (static)-

Dynamic bending radius-

Additional feature-

Material-

105748
2 in stock
105748
Euchner

105748 Euchner - Non-contact safety switch CES-AR-CL2-... , plug connector M12, PUR

Weight0.29100984 lb

SeriesCES-AR

Product ClassSafety System

Assured operating distance Saomin.14 mm

Assured release distance Sarmax.60 mm

Center offset-

B10D-

In compliance with-

Switching voltage according to UL-

Switching delay from state change-

Switching frequency, electrical-

Switching currentmax.50 mA

Switching characteristics-

Switching voltage-

Design-

Ambient temperature-

Degree of protectionIP67

Housing materialPlastic, PBT

Installation orientationAny

Fusing0,25 ... 8 A

Rated conditional short-circuit current100 A

Method of operation-

ConnectionConnection cable PUR, length...

Number of NO contacts-

Tightening torquemax.1 Nm

Mechanical life-

Switching hysteresismin.1 mm

PFHD1.9 x 10⁻⁹

Operating distance19 mm

Mission time20

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R≤ 10

Discrepancy timemax.10 ms

Off-state current Irmax.0,25 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Test pulsesmax.1 ms (Applies for a loa...

Test-pulse intervalmin.140 ms

Output voltage0,8 x UB ... UB V DC

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Type of outputp-switching, short circuit-p...

Rated impulse withstand voltage Uimp1,5 kV

Rated insulation voltage Ui75 V

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Current consumptionmax.50 mA (Without taking i...

Mounting distancemin.120 mm

Operating voltage DC24 V DC 15% ... 15% Regu...

Switching frequencymax.1 Hz

Ready delay10 s

Cable ambient temperature (dynamic)-25 ... 65 °C

Mounting methodSurface mounting on metal

Static bending radius5 x cable diameter

Shock and vibration resistanceIn acc. with EN 60947-5-3

Cable ambient temperature (static)-25 ... 65 °C

Dynamic bending radius10 x cable diameter

Additional feature-

Material-

119473
23 in stock
119473
Euchner

119473 Euchner - Non-contact safety switches CES-I-AR-.-C04-…, M12

Weight0.23589434 lb

SeriesCES-AR

Product ClassSafety System

Assured operating distance Sao6

Assured release distance Sarmax.60 mm

Center offset-

B10D-

In compliance with-

Switching voltage according to UL-

Switching delay from state change-

Switching frequency, electrical-

Switching currentmax.50 mA

Switching characteristics-

Switching voltage-

Design-

Ambient temperature-

Degree of protectionIP67

Housing materialPlastic, PBT

Installation orientationAny

Fusing0,25 ... 8 A

Rated conditional short-circuit current100 A

Method of operation-

ConnectionConnection cable PUR, length...

Number of NO contacts-

Tightening torquemax.0,8 Nm

Mechanical life-

Switching hysteresismin.1 mm

PFHD4.1 x 10⁻⁹

Operating distance11 mm

Mission time20

Performance LevelPL e

Category4

For the approval acc. to UL the following appliesOperation only with UL class...

Repeat accuracy R≤ 10

Discrepancy timemax.10 ms

Off-state current Irmax.0,25 mA

Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...

Test pulsesmax.1,0 ms (Applies for a l...

Test-pulse intervalmin.140 ms

Output voltage0,8 x UB ... UB V DC

Turn-on timemax.400 ms

Risk time according to EN 60947-5-3max.260 ms

Type of outputSemiconductor output, p-swit...

Rated impulse withstand voltage Uimp1,5 kV

Rated insulation voltage Ui300 V

Degree of contamination (external, according to EN 60947-1)3

Safety classIII

EMC protection requirementsIn acc. with EN IEC 60947-5-...

Extension of risk time according to EN 60947-5-3 per devicemax.5 ms

Current consumptionmax.35 mA (Without taking i...

Mounting distancemin.80 mm

Operating voltage DC24 V DC 15% ... 15% Regu...

Switching frequencymax.1 Hz

Ready delay10 s

Cable ambient temperature (dynamic)-25 ... 65 °C

Mounting methodSurface mounting on metal

Static bending radius5 x cable diameter

Shock and vibration resistanceIn acc. with EN 60947-5-3

Cable ambient temperature (static)-25 ... 65 °C

Dynamic bending radius10 x cable diameter

Additional featureRubber support included

MaterialNBR 80 ±5 Shore

About the manufacturer

Euchner

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.

Recently viewed products

Relevant products

FAQ

What is the price of 102275?
The price of 102275 on MQ Automation is $86.68. Order now.

Out if stock but available for backorder.

102275 Euchner - Read heads, design A, for ESM, M8

What can I help you find today?

Recommended parts