097945 Euchner Safety Switches
Part#:097945
Alt. Part#:CES-A-C5H-01-EX
Manufacturer:Euchner
Category:Safety Switches
Product Lifecycle:Active
Product description
097945 Euchner - SAFETY SWITCH
Product Details
- Weight 1.201725 lb
- Switching hysteresis min.1 mm (Applies for surface mounting on aluminum)
- Assured release distance Sar max.58 mm
- Assured operating distance Sao min.15 mm (Applies for surface mounting on aluminum)
- Operating distance 22 mm (Applies on surface mounting on aluminum; in a non-metallic environment the typical operating distance increases to 30 mm.)
- Distance s, actuator min.6 mm
- Mission time 20 y
- Diagnostic Coverage (DC) 99 %
- Performance Level PL e
- Category 4 (Category 4 according to EN 13849-1 for monitoring short circuits of safety outputs. A short circuit on LA and LB must be detected by external pulsing or must be excluded by laying the cable with protection.)
- PFHD 3.7 x 10⁻⁹
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Explosion protection II3G Ex ic ec IIB T5 Gc X / II3D Ex ic tc IIIC T90°C Dc X (Gc X = All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC 61558‑2‑6 with limited output voltage in the event of a fault, or by o
- Switching load max. DC 24 V, class 2
- Repeat accuracy R max.10 %
- Type of output Semiconductor outputs, p-switching, short circuit-proof, electrically decoupled (To ensure safety, both safety outputs (LA and LB) must be evaluated.)
- Rated conditional short-circuit current max.100 A
- Discrepancy time max.120 ms
- Power supply output load 24 V DC 18 ... 27 V DC
- Output current 1 ... 100 mA
- Output voltage 0 ... 1 V DC
- LED indicator Status LED
- Degree of contamination (external, according to EN 60947-1) 3
- Dwell time min.0,5 s (The dwell time of an actuator inside and outside the operating distance must be at least 0.5 s to ensure reliable detection of internal faults in the evaluation unit (self-monitoring).)
- EMC protection requirements In acc. with EN 60947-5-3
- Rated impulse withstand voltage Uimp 1,5 kV
- Rated insulation voltage Ui 300 V (Tested by employers' liability insurance association up to 75 V.)
- Fusing 0,25 ... 8 A
- Current consumption 80 mA
- Operating voltage DC 21 ... 24 ... 27 V DC Regulated, residual ripple < 5 %
- Connection M12 plug connector, 8-pin, screen can be applied
- Switching frequency max.1 Hz
- Reaction time max.180 ms (Corresponds to the risk time according to EN 60947-5-3. This is the maximum switch-off delay for the safety outputs following removal of the actuator.)
- Ready delay max.3 s (After the operating voltage is switched on, the semiconductor outputs are switched off and the monitoring outputs are set LOW during the ready delay.)
- Degree of protection IP65/IP67
- Ambient temperature -20 ... 50 °C
- Installation orientation Any
- Housing material Plastic PBT V0 GF30
- Mounting distance min.80 mm
- Tightening torque max.0,6 Nm
- Weight 0,4 kg
- Dimensions According to EN 60947-5-2
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 097945 on MQ Automation is $882.78. Order now.
Manufacturer warranty
097945 Euchner
$882.78
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$882.78
$882.78 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 097945 with other products
Weight
Switching hysteresis
Assured release distance ...
Assured operating distanc...
Operating distance
Distance s, actuator
Mission time
Diagnostic Coverage (DC)
Performance Level
Category
PFHD
For the approval acc. to ...
Explosion protection
Switching load
Repeat accuracy R
Type of output
Rated conditional short-c...
Discrepancy time
Power supply output load
Output current
Output voltage
LED indicator
Degree of contamination (...
Dwell time
EMC protection requiremen...
Rated impulse withstand v...
Rated insulation voltage ...
Fusing
Current consumption
Operating voltage DC
Connection
Switching frequency
Reaction time
Ready delay
Degree of protection
Ambient temperature
Installation orientation
Housing material
Mounting distance
Tightening torque
Dimensions
Series
Product Class
Additional feature
Off-state current Ir
Test-pulse interval
Utilization category acc....
Test pulses
Switching current
Turn-on time
Risk time according to EN...
Safety class
Extension of risk time ac...
Mounting method
Shock and vibration resis...
Cable ambient temperature...
Cable ambient temperature...
Dynamic bending radius
Material
Static bending radius
Selected product
Weight1.201725 lb
Switching hysteresismin.1 mm (Applies for surfa...
Assured release distance Sarmax.58 mm
Assured operating distance Saomin.15 mm (Applies for surf...
Operating distance22 mm (Applies on surface m...
Distance s, actuatormin.6 mm
Mission time20 y
Diagnostic Coverage (DC)99 %
Performance LevelPL e
Category4 (Category 4 according to...
PFHD3.7 x 10⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Explosion protectionII3G Ex ic ec IIB T5 Gc X / ...
Switching loadmax. DC 24 V, class 2
Repeat accuracy Rmax.10 %
Type of outputSemiconductor outputs, p-swi...
Rated conditional short-circuit currentmax.100 A
Discrepancy timemax.120 ms
Power supply output load24 V DC 18 ... 27 V DC
Output current1 ... 100 mA
Output voltage0 ... 1 V DC
LED indicatorStatus LED
Degree of contamination (external, according to EN 60947-1)3
Dwell timemin.0,5 s (The dwell time o...
EMC protection requirementsIn acc. with EN 60947-5-3
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui300 V (Tested by employers...
Fusing0,25 ... 8 A
Current consumption80 mA
Operating voltage DC21 ... 24 ... 27 V DC Regu...
ConnectionM12 plug connector, 8-pin, s...
Switching frequencymax.1 Hz
Reaction timemax.180 ms (Corresponds to ...
Ready delaymax.3 s (After the operatin...
Degree of protectionIP65/IP67
Ambient temperature-20 ... 50 °C
Installation orientationAny
Housing materialPlastic PBT V0 GF30
Mounting distancemin.80 mm
Tightening torquemax.0,6 Nm
DimensionsAccording to EN 60947-5-2
Series-
Product Class-
Additional feature-
Off-state current Ir-
Test-pulse interval-
Utilization category acc. to EN 60947-5-2-
Test pulses-
Switching current-
Turn-on time-
Risk time according to EN 60947-5-3-
Safety class-
Extension of risk time according to EN 60947-5-3 per device-
Mounting method-
Shock and vibration resistance-
Cable ambient temperature (static)-
Cable ambient temperature (dynamic)-
Dynamic bending radius-
Material-
Static bending radius-
Weight0.23589434 lb
Switching hysteresismin.1 mm
Assured release distance Sarmax.60 mm
Assured operating distance Sao6
Operating distance11 mm
Distance s, actuator-
Mission time20
Diagnostic Coverage (DC)-
Performance LevelPL e
Category4
PFHD4.1 x 10⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Explosion protection-
Switching load-
Repeat accuracy R≤ 10
Type of outputSemiconductor output, p-swit...
Rated conditional short-circuit current100 A
Discrepancy timemax.10 ms
Power supply output load-
Output current-
Output voltage0,8 x UB ... UB V DC
LED indicator-
Degree of contamination (external, according to EN 60947-1)3
Dwell time-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui300 V
Fusing0,25 ... 8 A
Current consumptionmax.35 mA (Without taking i...
Operating voltage DC24 V DC 15% ... 15% Regu...
ConnectionConnection cable PUR, length...
Switching frequencymax.1 Hz
Reaction time-
Ready delay10 s
Degree of protectionIP67
Ambient temperature-
Installation orientationAny
Housing materialPlastic, PBT
Mounting distancemin.80 mm
Tightening torquemax.0,8 Nm
Dimensions-
SeriesCES-AR
Product ClassSafety System
Additional featureRubber support included
Off-state current Irmax.0,25 mA
Test-pulse intervalmin.140 ms
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Test pulsesmax.1,0 ms (Applies for a l...
Switching currentmax.50 mA
Turn-on timemax.400 ms
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Mounting methodSurface mounting on metal
Shock and vibration resistanceIn acc. with EN 60947-5-3
Cable ambient temperature (static)-25 ... 65 °C
Cable ambient temperature (dynamic)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
MaterialNBR 80 ±5 Shore
Static bending radius5 x cable diameter
105748
Euchner
105748 Euchner - Non-contact safety switch CES-AR-CL2-... , plug connector M12, PUR
Weight0.29100984 lb
Switching hysteresismin.1 mm
Assured release distance Sarmax.60 mm
Assured operating distance Saomin.14 mm
Operating distance19 mm
Distance s, actuator-
Mission time20
Diagnostic Coverage (DC)-
Performance LevelPL e
Category4
PFHD1.9 x 10⁻⁹
For the approval acc. to UL the following appliesOperation only with UL class...
Explosion protection-
Switching load-
Repeat accuracy R≤ 10
Type of outputp-switching, short circuit-p...
Rated conditional short-circuit current100 A
Discrepancy timemax.10 ms
Power supply output load-
Output current-
Output voltage0,8 x UB ... UB V DC
LED indicator-
Degree of contamination (external, according to EN 60947-1)3
Dwell time-
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp1,5 kV
Rated insulation voltage Ui75 V
Fusing0,25 ... 8 A
Current consumptionmax.50 mA (Without taking i...
Operating voltage DC24 V DC 15% ... 15% Regu...
ConnectionConnection cable PUR, length...
Switching frequencymax.1 Hz
Reaction time-
Ready delay10 s
Degree of protectionIP67
Ambient temperature-
Installation orientationAny
Housing materialPlastic, PBT
Mounting distancemin.120 mm
Tightening torquemax.1 Nm
Dimensions-
SeriesCES-AR
Product ClassSafety System
Additional feature-
Off-state current Irmax.0,25 mA
Test-pulse intervalmin.140 ms
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Test pulsesmax.1 ms (Applies for a loa...
Switching currentmax.50 mA
Turn-on timemax.400 ms
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Mounting methodSurface mounting on metal
Shock and vibration resistanceIn acc. with EN 60947-5-3
Cable ambient temperature (static)-25 ... 65 °C
Cable ambient temperature (dynamic)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
Material-
Static bending radius5 x cable diameter
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 097945?
The price of 097945 on MQ Automation is $882.78. Order now.
Out if stock but available for backorder.
097945 Euchner - SAFETY SWITCH
Similar products from: Safety Switches
What can I help you find today?
