097525 Euchner Safety Proximity Sensors
Part#:097525
Alt. Part#:CES-A-W5H-01
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
097525 Euchner - Non-contact safety switch CES-A-W5...
Product Details
- Weight 0.76941238 lb
- Series CES-A-.5
- Product Class Safety System
- Switching hysteresis min.2 mm (In non-metallic environment)
- Assured operating distance Sao min.19 mm (In non-metallic environment)
- Assured release distance Sar max.41 mm
- Distance s, actuator min.4 mm
- Operating distance 21 mm (In non-metallic environment)
- Diagnostic Coverage (DC) 99 %
- Power supply output load 24 V DC 18 ... 27 V DC
- Mission time 20 y
- PFHD 3.7 x 10⁻⁹
- Performance Level PL e
- Category 4 (Category 4 according to EN 13849-1 for monitoring short circuits of safety outputs. A short circuit on LA and LB must be detected by external pulsing or must be excluded by laying the cable with protection.)
- Repeat accuracy R max.10 %
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Discrepancy time max.120 ms
- Rated conditional short-circuit current max.100 A
- Switching load max. DC 24 V, class 2
- Utilization category acc. to EN 60947-5-2 24V 400mA
- Type of output Semiconductor outputs, p-switching, short circuit-proof, electrically decoupled (To ensure safety, both safety outputs (LA and LB) must be evaluated.)
- Output current 1 ... 400 mA
- LED indicator Safety outputs status / diagnostics (combined)
- Output voltage U(+LA) - 1,5 ... U(+LA) V DC
- Rated impulse withstand voltage Uimp 1,5 kV
- EMC protection requirements In acc. with EN 60947-5-3
- Degree of contamination (external, according to EN 60947-1) 3
- Connection M12 plug connector, 8-pin, screen can be applied
- Operating voltage DC 18 ... 24 ... 27 V DC Regulated, residual ripple < 5 %
- Rated insulation voltage Ui 300 V (Tested by employers' liability insurance association up to 75 V.)
- Fusing 0,25 ... 8 A
- Dwell time min.0,5 s (The dwell time of an actuator inside and outside the operating distance must be at least 0.5 s to ensure reliable detection of internal faults in the evaluation unit (self-monitoring).)
- Reaction time max.180 ms (Corresponds to the risk time according to EN 60947-5-3. This is the maximum switch-off delay for the safety outputs following removal of the actuator.)
- Current consumption 80 mA
- Switching frequency max.1 Hz
- Ready delay max.3 s (After the operating voltage is switched on, the semiconductor outputs are switched off and the monitoring outputs are set LOW during the ready delay.)
- Degree of protection IP65/IP67
- Tightening torque max.1 Nm
- Mounting distance min.80 mm
- Ambient temperature -20 ... 55 °C
- Installation orientation Any
- Weight 0,4 kg
- Housing material Plastic, PBT
- Dimensions According to EN 60947-5-2: (LxWxH) 131x40x40
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 097525 on MQ Automation is $346.72. Order now.
About the product
Safety switch with integrated evaluation electronics;Pulsed signals can be switched;2 safety outputs (semiconductor outputs);Category 4 / PL e according to EN ISO 13849-1;Multicode
Manufacturer warranty
097525 Euchner
$346.72
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$346.72
$346.72 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 097525 with other products
Weight
Series
Product Class
Switching hysteresis
Assured operating distanc...
Assured release distance ...
Distance s, actuator
Operating distance
Diagnostic Coverage (DC)
Power supply output load
Mission time
PFHD
Performance Level
Category
Repeat accuracy R
For the approval acc. to ...
Discrepancy time
Rated conditional short-c...
Switching load
Utilization category acc....
Type of output
Output current
LED indicator
Output voltage
Rated impulse withstand v...
EMC protection requiremen...
Degree of contamination (...
Connection
Operating voltage DC
Rated insulation voltage ...
Fusing
Dwell time
Reaction time
Current consumption
Switching frequency
Ready delay
Degree of protection
Tightening torque
Mounting distance
Ambient temperature
Installation orientation
Housing material
Dimensions
Off-state current Ir
Test pulses
Test-pulse interval
Switching current
Turn-on time
Risk time according to EN...
Safety class
Extension of risk time ac...
Cable ambient temperature...
Mounting method
Static bending radius
Shock and vibration resis...
Cable ambient temperature...
Dynamic bending radius
Additional feature
Material
Selected product
Weight0.76941238 lb
SeriesCES-A-.5
Product ClassSafety System
Switching hysteresismin.2 mm (In non-metallic e...
Assured operating distance Saomin.19 mm (In non-metallic ...
Assured release distance Sarmax.41 mm
Distance s, actuatormin.4 mm
Operating distance21 mm (In non-metallic envi...
Diagnostic Coverage (DC)99 %
Power supply output load24 V DC 18 ... 27 V DC
Mission time20 y
PFHD3.7 x 10⁻⁹
Performance LevelPL e
Category4 (Category 4 according to...
Repeat accuracy Rmax.10 %
For the approval acc. to UL the following appliesOperation only with UL class...
Discrepancy timemax.120 ms
Rated conditional short-circuit currentmax.100 A
Switching loadmax. DC 24 V, class 2
Utilization category acc. to EN 60947-5-224V 400mA
Type of outputSemiconductor outputs, p-swi...
Output current1 ... 400 mA
LED indicatorSafety outputs status / diag...
Output voltageU(+LA) - 1,5 ... U(+LA) V D...
Rated impulse withstand voltage Uimp1,5 kV
EMC protection requirementsIn acc. with EN 60947-5-3
Degree of contamination (external, according to EN 60947-1)3
ConnectionM12 plug connector, 8-pin, s...
Operating voltage DC18 ... 24 ... 27 V DC Regu...
Rated insulation voltage Ui300 V (Tested by employers...
Fusing0,25 ... 8 A
Dwell timemin.0,5 s (The dwell time o...
Reaction timemax.180 ms (Corresponds to ...
Current consumption80 mA
Switching frequencymax.1 Hz
Ready delaymax.3 s (After the operatin...
Degree of protectionIP65/IP67
Tightening torquemax.1 Nm
Mounting distancemin.80 mm
Ambient temperature-20 ... 55 °C
Installation orientationAny
Housing materialPlastic, PBT
DimensionsAccording to EN 60947-5-2: (...
Off-state current Ir-
Test pulses-
Test-pulse interval-
Switching current-
Turn-on time-
Risk time according to EN 60947-5-3-
Safety class-
Extension of risk time according to EN 60947-5-3 per device-
Cable ambient temperature (dynamic)-
Mounting method-
Static bending radius-
Shock and vibration resistance-
Cable ambient temperature (static)-
Dynamic bending radius-
Additional feature-
Material-
About the manufacturer

As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 097525?
The price of 097525 on MQ Automation is $346.72. Order now.
Out if stock but available for backorder.
097525 Euchner - Non-contact safety switch CES-A-W5...
Similar products from: Safety Proximity Sensors
What can I help you find today?