077750 Euchner Safety Proximity Sensors
Part#:077750
Alt. Part#:CES-A-C5E-01
Manufacturer:Euchner
Category:Safety Proximity Sensors
Product Lifecycle:Active
Product description
077750 Euchner - Non-contact safety switch CES-A-C5...
Product Details
- Weight 0.771617 lb
- Series CES-A-.5
- Product Class Safety System
- Switching hysteresis min.1 mm (Applies for surface mounting on aluminum)
- Assured operating distance Sao min.15 mm (Applies for surface mounting on aluminum)
- Assured release distance Sar max.58 mm
- Diagnostic Coverage (DC) 90 %
- Distance s, actuator min.6 mm
- Operating distance 22 mm (Applies on surface mounting on aluminum; in a non-metallic environment the typical operating distance increases to 30 mm.)
- PFHD 4.29 x 10⁻⁸
- Performance Level PL e
- Category 3
- Mission time 20 y
- Power supply output load 24 V DC 18 ... 27 V DC
- For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
- Repeat accuracy R max.10 %
- LED indicator Status LED
- Discrepancy time max.120 ms
- Rated conditional short-circuit current max.100 A
- Utilization category acc. to EN 60947-5-2 24V 400mA
- Switching load max. DC 24 V, class 2
- Output current 1 ... 400 mA
- Type of output Semiconductor outputs, p-switching, short circuit-proof, electrically decoupled (To ensure safety, both safety outputs (LA and LB) must be evaluated.)
- Output voltage U(+LB) - 1,5 ... U(+LB) V DC
- Rated insulation voltage Ui 300 V (Tested by employers' liability insurance association up to 75 V.)
- Degree of contamination (external, according to EN 60947-1) 3
- EMC protection requirements In acc. with EN 60947-5-3
- Rated impulse withstand voltage Uimp 1,5 kV
- Fusing 0,25 ... 8 A
- Operating voltage DC 18 ... 24 ... 27 V DC Regulated, residual ripple < 5 %
- Current consumption 80 mA
- Mounting distance min.80 mm
- Connection M12 plug connector, 8-pin, screen can be applied
- Ambient temperature -20 ... 55 °C
- Housing material Plastic, PBT
- Weight 0,4 kg
- Ready delay max.3 s (After the operating voltage is switched on, the semiconductor outputs are switched off and the monitoring outputs are set LOW during the ready delay.)
- Dwell time min.0,5 s (The dwell time of an actuator inside and outside the operating distance must be at least 0.5 s to ensure reliable detection of internal faults in the evaluation unit (self-monitoring).)
- Installation orientation Any
- Degree of protection IP65/IP67
- Switching frequency max.1 Hz
- Reaction time max.180 ms (Corresponds to the risk time according to EN 60947-5-3. This is the maximum switch-off delay for the safety outputs following removal of the actuator.)
- Tightening torque max.0,6 Nm
- Dimensions According to EN 60947-5-2: (LxWxH) 131x40x40
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 077750 on MQ Automation is $466.76. Order now.
About the product
Safety switch with integrated evaluation electronics;Pulsed signals can be switched;2 safety outputs (semiconductor outputs);Category 3 / PL e according to EN ISO 13849-1;Unicode
Manufacturer warranty
077750 Euchner
$466.76
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$466.76
$466.76 each
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Manufacturer warranty
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 077750 with other products
Weight
Series
Product Class
Switching hysteresis
Assured operating distanc...
Assured release distance ...
Diagnostic Coverage (DC)
Distance s, actuator
Operating distance
PFHD
Performance Level
Category
Mission time
Power supply output load
For the approval acc. to ...
Repeat accuracy R
LED indicator
Discrepancy time
Rated conditional short-c...
Utilization category acc....
Switching load
Output current
Type of output
Output voltage
Rated insulation voltage ...
Degree of contamination (...
EMC protection requiremen...
Rated impulse withstand v...
Fusing
Operating voltage DC
Current consumption
Mounting distance
Connection
Ambient temperature
Housing material
Ready delay
Dwell time
Installation orientation
Degree of protection
Switching frequency
Reaction time
Tightening torque
Dimensions
Additional feature
Off-state current Ir
Test-pulse interval
Test pulses
Switching current
Turn-on time
Risk time according to EN...
Safety class
Extension of risk time ac...
Mounting method
Shock and vibration resis...
Cable ambient temperature...
Cable ambient temperature...
Dynamic bending radius
Material
Static bending radius
Selected product
Weight0.771617 lb
SeriesCES-A-.5
Product ClassSafety System
Switching hysteresismin.1 mm (Applies for surfa...
Assured operating distance Saomin.15 mm (Applies for surf...
Assured release distance Sarmax.58 mm
Diagnostic Coverage (DC)90 %
Distance s, actuatormin.6 mm
Operating distance22 mm (Applies on surface m...
PFHD4.29 x 10⁻⁸
Performance LevelPL e
Category3
Mission time20 y
Power supply output load24 V DC 18 ... 27 V DC
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy Rmax.10 %
LED indicatorStatus LED
Discrepancy timemax.120 ms
Rated conditional short-circuit currentmax.100 A
Utilization category acc. to EN 60947-5-224V 400mA
Switching loadmax. DC 24 V, class 2
Output current1 ... 400 mA
Type of outputSemiconductor outputs, p-swi...
Output voltageU(+LB) - 1,5 ... U(+LB) V D...
Rated insulation voltage Ui300 V (Tested by employers...
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN 60947-5-3
Rated impulse withstand voltage Uimp1,5 kV
Fusing0,25 ... 8 A
Operating voltage DC18 ... 24 ... 27 V DC Regu...
Current consumption80 mA
Mounting distancemin.80 mm
ConnectionM12 plug connector, 8-pin, s...
Ambient temperature-20 ... 55 °C
Housing materialPlastic, PBT
Ready delaymax.3 s (After the operatin...
Dwell timemin.0,5 s (The dwell time o...
Installation orientationAny
Degree of protectionIP65/IP67
Switching frequencymax.1 Hz
Reaction timemax.180 ms (Corresponds to ...
Tightening torquemax.0,6 Nm
DimensionsAccording to EN 60947-5-2: (...
Additional feature-
Off-state current Ir-
Test-pulse interval-
Test pulses-
Switching current-
Turn-on time-
Risk time according to EN 60947-5-3-
Safety class-
Extension of risk time according to EN 60947-5-3 per device-
Mounting method-
Shock and vibration resistance-
Cable ambient temperature (static)-
Cable ambient temperature (dynamic)-
Dynamic bending radius-
Material-
Static bending radius-
Weight0.23589434 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Sao6
Assured release distance Sarmax.60 mm
Diagnostic Coverage (DC)-
Distance s, actuator-
Operating distance11 mm
PFHD4.1 x 10⁻⁹
Performance LevelPL e
Category4
Mission time20
Power supply output load-
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
LED indicator-
Discrepancy timemax.10 ms
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Switching load-
Output current-
Type of outputSemiconductor output, p-swit...
Output voltage0,8 x UB ... UB V DC
Rated insulation voltage Ui300 V
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp1,5 kV
Fusing0,25 ... 8 A
Operating voltage DC24 V DC 15% ... 15% Regu...
Current consumptionmax.35 mA (Without taking i...
Mounting distancemin.80 mm
ConnectionConnection cable PUR, length...
Ambient temperature-
Housing materialPlastic, PBT
Ready delay10 s
Dwell time-
Installation orientationAny
Degree of protectionIP67
Switching frequencymax.1 Hz
Reaction time-
Tightening torquemax.0,8 Nm
Dimensions-
Additional featureRubber support included
Off-state current Irmax.0,25 mA
Test-pulse intervalmin.140 ms
Test pulsesmax.1,0 ms (Applies for a l...
Switching currentmax.50 mA
Turn-on timemax.400 ms
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Mounting methodSurface mounting on metal
Shock and vibration resistanceIn acc. with EN 60947-5-3
Cable ambient temperature (static)-25 ... 65 °C
Cable ambient temperature (dynamic)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
MaterialNBR 80 ±5 Shore
Static bending radius5 x cable diameter
105748
Euchner
105748 Euchner - Non-contact safety switch CES-AR-CL2-... , plug connector M12, PUR
Weight0.29100984 lb
SeriesCES-AR
Product ClassSafety System
Switching hysteresismin.1 mm
Assured operating distance Saomin.14 mm
Assured release distance Sarmax.60 mm
Diagnostic Coverage (DC)-
Distance s, actuator-
Operating distance19 mm
PFHD1.9 x 10⁻⁹
Performance LevelPL e
Category4
Mission time20
Power supply output load-
For the approval acc. to UL the following appliesOperation only with UL class...
Repeat accuracy R≤ 10
LED indicator-
Discrepancy timemax.10 ms
Rated conditional short-circuit current100 A
Utilization category acc. to EN 60947-5-224V 200mA (Caution: outputs...
Switching load-
Output current-
Type of outputp-switching, short circuit-p...
Output voltage0,8 x UB ... UB V DC
Rated insulation voltage Ui75 V
Degree of contamination (external, according to EN 60947-1)3
EMC protection requirementsIn acc. with EN IEC 60947-5-...
Rated impulse withstand voltage Uimp1,5 kV
Fusing0,25 ... 8 A
Operating voltage DC24 V DC 15% ... 15% Regu...
Current consumptionmax.50 mA (Without taking i...
Mounting distancemin.120 mm
ConnectionConnection cable PUR, length...
Ambient temperature-
Housing materialPlastic, PBT
Ready delay10 s
Dwell time-
Installation orientationAny
Degree of protectionIP67
Switching frequencymax.1 Hz
Reaction time-
Tightening torquemax.1 Nm
Dimensions-
Additional feature-
Off-state current Irmax.0,25 mA
Test-pulse intervalmin.140 ms
Test pulsesmax.1 ms (Applies for a loa...
Switching currentmax.50 mA
Turn-on timemax.400 ms
Risk time according to EN 60947-5-3max.260 ms
Safety classIII
Extension of risk time according to EN 60947-5-3 per devicemax.5 ms
Mounting methodSurface mounting on metal
Shock and vibration resistanceIn acc. with EN 60947-5-3
Cable ambient temperature (static)-25 ... 65 °C
Cable ambient temperature (dynamic)-25 ... 65 °C
Dynamic bending radius10 x cable diameter
Material-
Static bending radius5 x cable diameter
About the manufacturer
As experts in industrial safety engineering, we design and produce customized products and solutions to meet the needs of clients across various industries. Implementing our safety guards on machinery and installations reduces hazards and risks, thereby safeguarding both individuals and processes. With a global team of 800 employees, safety remains our top priority.
Recently viewed products
Relevant products
FAQ
What is the price of 077750?
The price of 077750 on MQ Automation is $466.76. Order now.
Out if stock but available for backorder.
077750 Euchner - Non-contact safety switch CES-A-C5...
Similar products from: Safety Proximity Sensors
What can I help you find today?
